Dedicated power circuits

If you have a Federal or anything with a stab-lock breaker you 100% need to get rid of them!

CH, Siemens and Square D all make solid equipment.  I have a couple of notes for you:

• I prefer the whole house surge protectors that sit on the panel like a breaker.  They have less wiring and therefore better chances of working with faster surges.
• All whole house surge protectors and the NEC recommend that you use individual surge protectors on sensitive electronics IN ADDITION to the whole house units.
• Remember your home outlets must be tamper resistant too. Several boutique, cryo, blah blah outlets are not.
• Use Furman surge protectors with SMP/LiFT to protect your gear.
• Use a hospital grade Ethernet isolator to protect your network.

The Torus all in one looks interesting but at 18k it ain’t happening.

I get that, look at the Sorcer Apprentice from Add-Power- I think it around $2K

Try get all runs on the same leg in the breaker box. Otherwise, you could run into hum issues.

Yes all the lines on the same.leg. also.make sure the.lines are the exact same length  Also cross the wires over a few.times on the way to the outlets. I like the bad boy furutech  plugs I run both hold and rhodium  I have six dedicated  20 amp circuits  to my stereo 

Yes all the lines on the same.leg. also.make sure the.lines are the exact same length  Also cross the wires over a few.times on the way to the outlets. I like the bad boy furutech  plugs I run both hold and rhodium  I have six dedicated  20 amp circuits  to my stereo