Detachable Head shell or Not?


I am in the process to up my game with some phono system tweaking.

I read in these forums of many people here with multiple arms, multiple cartridges and even multiple turntables.  I am guilty of this myself but moderately compared to so many phono hardware diehards here.

All the continued comments on Talea vs. Schroeder vs. Kuzma, Da Vinci, Tri-Planar, etc., etc, on these forums.  And the flavor of the day cartridge.  One easy way to manage the use of many cartridges, easily swapping between them, and getting down to one turntable would be to run with a tonearm that supports removable head shells or arm tubes.  And yet this does not seem to be widely done here.  Is everybody just too proud of all the pretty phono hardware to admire?

Many highly respected arms of the past, FR 64/66, Ikeda, and now Glanz, Kuzma 4-Point, the new Tru-Glider, all with removable heads.  And the Graham and Da Vinci with removable arm tubes.  These products have a huge fan base and yet there seems to be an equal number of those against any extra mechanical couplings and cable junction boxes, din connections, etc.

I can appreciate having two cartridges, one to bring out that addictive lush bloomy performance and another that shows off that clarity and detail “to die for”.  Being able to easily swap between the two, with hopefully only a quick VTF/VTA change, would be mighty nice.  If too painful a process, I can understand the need for two arms here;  like the idea of going through many LPs in an evening and not being obsessed with tweaking the arm for each.  I hope I never get obsessed to do get to that point.  But for different days/nights, to listen to different kinds of music, it could be mighty nice to swap out one cartridge for another in different head shells without the added cluster and cost of oh please, not another tonearm!.  Do a minute or two of tweaking, ONCE, for that listening session, and then enjoy.  There is always the added risk during the uninstall / install process to damage that prized cartridge.

Is running with a tonearm that has a detachable head shell all that sinful / shameful in the audiophile world ……. or not?  I’d like to hear from those who have achieved musical bliss with removable head shell arms and also from those that if asked to try such a product would likely say, “over my dead body”!

John

jafox

Jafox, Given the difficulty you describe in comparing tonearm with vs tonearm without, and with which I agree, I choose a second best option, which is to listen for several weeks on a regular basis to one setup in my own system where I know intimately every component in the pathway, and then to change from setup A to setup B and listen again for an extended period of time to B. Ideally, that would be followed by a second audition of A. But you’re quite right, it’s a comparison with more than one variable.

what tonearm offers both a continuous wire connection AND an interchangeable headshell?

**** listen for several weeks on a regular basis to one setup in my own system where I know intimately every component in the pathway, and then to change from setup A to setup B and listen again for an extended period of time to B. Ideally, that would be followed by a second audition of A. ****

Exactly. Trust your ears! I recognize the influence of “placebo effect”, but IMO the road to the best possible sound from one’s system is to keep a healthy amount of skepticism always secondary to what we actually hear.

'what tonearm offers both a continuous wire connection AND an interchangeable headshell? '

In reply to the above inquiry, the following is a sentence from a previous mail posted by myself within this Thread.

'Very recently the arm engineer has produced a upgrade detachable Headshell for the arm, that has a much improved coupling to the Wand.'

This redesign for the Headshell has a Removable Part and continuous Tonearm Wire.

The option to route wire continuous to the Phonostage is an option, as well as the option being available, that will omit the commonly seen wire connections at the Headshell / Wand interface but make use the earlier produced models, upgraded termination points for the wire when routed within the wand.

@frogman I am totally on board with your suggestion about routing a Wire Externally for the purpose of trials, and I am due to commence with this on a few differing but Bespoke Tonearm Designs during the upcoming months.

I already have had deliveries of ultra pure Silver and Copper Wires where 0.3mm OD is a sheathed version and the OD is less for the Wires that have a insulating lacquer without a Sheath. 

I am not sure if a Lacquered Wire will be welcomed as a part to be routed within the Wand, but time will tell, especially if it is a high on the list wire for the impression being made.   

I've got a Technics SL-1200G; it's got a detachable headshell and I'm perfectly happy with it....

what tonearm offers both a continuous wire connection AND an interchangeable headshell?

Here it is: Tru-Glider Tonearm