Digital microscope recommendations

Per your request Actusreus, here is a photo I took last night: http://i45.tinypic.com/9lbml5.jpg

Guess the stylus design .......

It is a new JICO SAS that is mounted on my old Shure V15 Type III cart. This cart is not in use as my MC Sigma Genesis 2000 is getting all the playing time.

I received the Supereyes scope in the mail yesterday. Gamma was reduced for black background. I used a glass coffee table and one extra led "book" light. Magnification is about 250X as I was over a half inch from stylus - closer gives higher magnification.

In the next few days, I'll be using the measuring feature to determine SRA for my Sigma cart. Mike at Continuum uses a glass disk to rest the cart (mounted on tonearm). This gives better light distribution.

The Supereyes scope is like a large Mount Blanc pen. It is smaller in diameter than the Dinos I have seen, about a three-quarters inch in diameter. You need a mounting platform for these things as dialing in focus is tricky. I have an old flexible lamp that I converted for use - the rigidity was very helpful. Used hose clamps to hold the scope on the platform.

Jragsda
Many thanks this is most useful.Do share your experience of measuring SRA.If its not tooo complicated, I intend to join the SRA club !
NJoy
Pradeep

Actusreus and Sonnyboy here are my results with this scope.

First, if you are going to check your mounted stylus make sure your watch is off, you are not wearing a long sleeve shirt, there are no pets near, and you will not be distracted. This is difficult work with a high cost for failure.

I used a rectangular piece of glass on top of the platter as the platform for the stylus. The Supereyes scope was right up to the glass, giving almost 400x. I took about 20 photos using the Supereyes software, all with different lighting or scope position. (Remember to make sure antiskate is not on by the way.)

Here is an unzoomed photo that gives a good edge of glass reference for the MB-Ruler software: http://i48.tinypic.com/2n7hzeu.jpg

I then zoomed this image to http://i49.tinypic.com/5vnfb7.jpg

Note the unusual angle of the front facet (facet 33). The back facet is the one I measured (facet 39). The stylus appears to be a Fritz Geiger like design sold by Soundsmith (i.e. optimized contour).

With this stylus design, Wally's approach I do not think is appropriate. Using facet 39 for SRA, I got 91.77 degrees. The patent suggests 90 degrees but I get better music closer to 92 degrees.

Measuring this was difficult because of the stylus type. If you have an A90 or other fritz design stylus, I can help you with the technique. Otherwise, I think most stylii would be easier like the ones in Wally's and MF's posts/articles.

Sonnyboy: Given MF's article about your stylus SRA from the factory, you should probably do this just to ensure you are not dealing with an unusual situation requiring a huge VTA adjustment.

Whew, it has been a long day.

Jragsda,
Thank you very much for posting your feedback and pictures. Sounds like the product is a winner for the price. Btw, I appears it should have come with a stand included in the price so perhaps you should inquire with the seller about it.

http:////toolboom.com/en/USB-Digital-Microscope-Supereyes-B008.php

Jragsda, Do you know if this microscope will work on an Mac? The manual only mentions Microsoft operating systems.