fire spark in 5AR4 rectifier tube for PrimaLuna Pr


All of a sudden, I see fire spark in one of the 5AR4 tube in my PrimaLuna Prologue 3 preamp so I turn it off immediately. I tried it again, and the same thing happen. What is going on?

Does it mean my tube is bad that I need to replace it? Or there is something wrong with my preamp? I did some research, it seems people said it may be the capacitance is too high, but I didn't change anything, could it be something goes wrong in the unit that results in capacitance being too high? Did I already damage my unit?

Thanks.
gte357s
If you are only replacing one 5AR4 make sure it is the same brand as the one you already have.
OMG, the 5AR4 must be extremely popular. They are so hard to find and so darn expensive. It seems I need to buy one JJ to replace it for now so I can start listening to music, it may take me a long time to score a pair of NOS.
GE, you can drive nails w/them, try Jim McShane Tubes or Andy at Vintage Tube Services.
Yes, mullard blackburn tubes are too expensive. Any cheaper but good NOS alternatives? Also, if I don't want to spend too much, is it still worthwhile to get 1 Mullard Blackburn? Or better to get a match pair of new stock?
Just a little FYI; The best sounding, most reliable and longest lasting rectifiers out there, are the Blackburn Plant, Mullard tubes(the earlier the production-the better). Unfortunately, do to all of the aforementioned facts; they are also the most expensive. ie:(http://www.ebay.com/itm/Mullard-Blackburn-Branded-Amperex-Bugle-Boy-GZ34-5AR4-Rectifier-Matched-Pair-/220910480753?pt=Vintage_Electronics_R2&hash=item336f4a6d71) (http://www.ebay.com/itm/vintage-Mullard-Blackburn-5AR4-GZ34-NOS-Hi-Performance-rectifier-tube-/200687014748?pt=Vintage_Electronics_R2&hash=item2eb9e0d35c) (http://www.ebay.com/itm/NOS-box-Mullard-GZ34-5AR4-double-halo-tested-1958-Blackburn-never-used-/120827434079?pt=Vintage_Electronics_R2&hash=item1c21e0545f) Personally(being your preamp is a dual-mono design), I'd replace both rectifiers, with a matched pair, to insure a balanced presentation from the two channels.
just replace the bad one...they don't need to be a matched pair. Although I'd probably replace the pair w/a nice pair of matching NOS & then keep the good single for a backup. enjoy!
I tried switching the tubes, and the spark appears on one of the tube, so, it is in fact the tube has gone bad.

So, now, can I just replace one or do I need to replace both with a matching pair?
5AR4's are one of those tubes you should keep on hand. A weak one usually shows up during the turn on transient. Some are more rugged than others and the various brands can have an impact on the sound quality.
The tube is more than likely bad. If you turned your pre off immediately, your equipment is probably ok.
When you buy the next set of tubes, make sure that they've been tested. Good luck.