2. amps-preamps
  3. 1323512295

fire spark in 5AR4 rectifier tube for PrimaLuna Pr

All of a sudden, I see fire spark in one of the 5AR4 tube in my PrimaLuna Prologue 3 preamp so I turn it off immediately. I tried it again, and the same thing happen. What is going on?

Does it mean my tube is bad that I need to replace it? Or there is something wrong with my preamp? I did some research, it seems people said it may be the capacitance is too high, but I didn't change anything, could it be something goes wrong in the unit that results in capacitance being too high? Did I already damage my unit?

Thanks.
gte357s
zmanastronomy's avatar
zmanastronomy
738 posts
 
The tube is more than likely bad. If you turned your pre off immediately, your equipment is probably ok.
When you buy the next set of tubes, make sure that they've been tested. Good luck.
rrog
1,958 posts
 
5AR4's are one of those tubes you should keep on hand. A weak one usually shows up during the turn on transient. Some are more rugged than others and the various brands can have an impact on the sound quality.
gte357s OP
281 posts
 
I tried switching the tubes, and the spark appears on one of the tube, so, it is in fact the tube has gone bad.

So, now, can I just replace one or do I need to replace both with a matching pair?
More to discover