2. analog
  3. 136022-53619

Furman solves ground loop issue?

I have a serious ground loop problem with my analog side. Digital is dead quiet.
Loud hum comes from the speakers when analog input is turned on.
Becomes louder when I increase gain.
A salesman said that if I plug my analog components into a Furman PL-PLUS C - 15A w/Voltmeter 
this would solve the problem.

Have tried all the usual methods-cheater plugs, transformers, using another circuit, grounding with copper wire, switching interconnects, but nothing works.
Something is going on between the pre and the phono stage. Tried a different make phono stage and the problem is still there.
Have spoken with people with all brands involved and nobody could help me.

Anybody have any experience with this product? Would it solve this hum problem?

Thank you
roxy1927
roxy1927 OP
125 posts
 
It started when I upgraded equipment. Went from a ss pre and amp. Now my pre is tube/ss and amp is ss. The digital sound is so much better with this new equipment but the hum(once I even got a radio station) is too loud for me to enjoy analog and I miss it a lot. I have an allnic H3000 and HA3000 and they sounded tremendous. When I remove the turntable from the equation hum is still there.

I think something is going on between the pre and the Allnic H3000. Live in a very large apartment building and my listening room is small so my options are limited. I thought I might try the Furman and if it doesn't work just return it. All interconnects and power cords worked fine with old equipment. 
twoleftears's avatar
twoleftears
5,318 posts
 
https://www.psaudio.com/ps_how/how-to-find-and-fix-hum/
roxy1927 OP
125 posts
 
Thank you. I hope I can find something that will work. It's been a while now and I'm getting worried. I've enjoyed analog too much to be without it besides the money spent.
erik_squires
16,055 posts
 
you know, honestly, while I do not recommend cheater plugs, if using them, removing Cable TV, and or making sure your pre and turntable are hooked up to the same outlet doesn't fix it: 

1 - You don't have a ground loop, you have noise. Try turning everything else in the house off. 
2 - You have a bad phono stage. 
van_men
1 posts
 
I just want to share my experience with my fellow audiogon.  I have major ground loop problems even with a new electrical main panel and multiple ground rods and ground to the main water line.  I use the Ebtech Hum X Ground Line Voltage Filter which can be bought on Amazon for $79.  This Ebtech Hum X can also be found on Musician’s Friend, Guitar Center, etc.  I use 3 Hum X on my 3 amps which work wonders.  Btw, I also have RGPC Substations & 600S & 400S, Shunyata Hydra V-Ray & Hydra 8.  Only the Ebtech Hum X works with eliminating the ground loop hum.  You can always return it if it doesn’t work in your system.

Good luck,
Tuan
More to discover