2. analog
  3. 1232660666

Grounding Hum

I recently got a new TT for Christmas. It's an MMF 2.2 LE. I think there's a grounding problem or something because there is a slight buzzing noise present. I looked through past threads on the topic here, but nothing seems to fit this situation. I've checked, and rechecked the connection between the TT, and the preamp. I've even used a Fluke voltmeter to check for continuity between the two. I've checked the headshell leads to the cartridge. All is well. Maybe it's the ground wire connection to the turntable itself? I've run out of options. Any ideas?
licoricepizza
blkadr
739 posts
 
You might try this, it has worked for me once when I had a similar problem. Affix an alligator clip to a wire. Connect the wire to your preamp and clamp the clip to the base of your tonearm, from underneath if possible. Its worth a try, good luck!
ghstudio
141 posts
 
The cartridge may be picking up hum from a transformer in some piece of gear nearby....have you tried moving the MMF?
licoricepizza OP
48 posts
 
I just tried the separate piece of wire trick. That didn't work. Now, I'll try moving the 'table and see what happens.
licoricepizza OP
48 posts
 
Here's some additional information, which may help:

If I flip the switch on my preamp (NAD1155) from MC to MM, the hum reduced, but doesn't go away. However, it seems that I, then, act as ground, because there is a more pronounced hum whenever I touch the preamp. The hum comes from both channels. A bypass wire from the turntable to the preamp had no effect. Moving the turntable (to the extent that I could) had 0 effect. The amp (B&K ST-140) is connected to a Stax SR34 headphone preamp. Then Monster Cables from the Stax unit to Vandersteen speakers.

Thanks to all those who contribute to my problem resolution.

Lee
80stech
20 posts
 
Try flipping the AC plug-ins around in their sockets one at a time. If your on split phase with ground return this could help. Let me know if this helps and I will explain why it does.
More to discover