Gruve Glide


Does anybody know exactly what this stuff is made of ? I just picked up a Vpi HW16.5 machine and a can of the Gruve Glide. This has shown some amazing results to my old collection. But the Gruv Glide smells like silicone. I was wondering if there was a generic product that would be less than $26 a can.
scottht
GroovMaster? Huh? Please elaborate. I must confess the most extensive cleaning I have done is using the Discwasher brush with some anti-static cleaner, rotating the platter(when off) and applying pressure. I would slowly roll the brush up lifting the dirt off the record. this was effective with paper debris, but not deep into the groove. I am sure this will solidify my newbie status and might even result in expulsion from the hallowed halls of audiophilia. I tried the Orbitrac but was not that impressed. I guess my question of next upgrade has been answered! Vacuum it is
Even though the stated purpose of Gruve-Glide is to reduce static, I've always thought that it acted as a lubricant on the grooves. I get better imaging, and a more 'liquid' sound.

I use it sparingly on an LP-12 with a Clearaudio Virtuoso Wood MkII cartridge. When I bring an LP over to one friends house, who has a VPI TNT with a Van den Hul cartridge/needle, he gets a collection of 'stuff' on his needle (residue?) It seems the more the needle conforms to the shape of the groove, the less Gruve-Glide you need.
Colitas, YOU ARE HEREBY BANISHED... at least until you wash all your precious vinyl.

A GroovMaster (sic) is a doohickey you can buy from a guy on Ebay. It consists of two discs, each with an embedded O-ring slightly larger than a record label. Make a sandwhich with an LP between the two discs and clamp everything together with the threaded bolt that goes through the center hole (supplied with the GM).

Voila! Your label now has a waterproof seal and the knobs you tighten the bolt with serve as handles so you never touch the vinyl. Very useful for hand washing and vacuuming. Useless if you have a RCM.

You can either bid on ebay for it or just email the seller. Last time I heard he'd sell one direct for $40 + s/h.
Dougdeacon, I have heard of this same type of contraption, called a UFO. No, not out at Area 51 either. I will go to E-bay immediately!
I saw the ufo too. It's butt ugly. I'll stick with the GroovMaster. I swear by Gruve-Glide.
More to discover