HDTV & current DVD players - What do WE do?


It's clear that DVD is going to be around for quite a while. So the dilemma now is how to get the most out of our standard-definition discs on the HDTVs we watch them on? Part of the answer involves video scaling, which is the process of filling in the spaces between pixels by borrowing parts of the existing pixels encoded in the DVD video. Many HDTV sets have scaling equipment built in to do this already, but oftentimes the cheap chips installed by the manufacturer are not up to the task, and leave the image looking blocky and pixelated. A good video processor can clean this up, but traditionally the decent ones cost thousands of dollars. A recent trend has seen the introduction of scaling properties into the DVD players themselves. Again, usually the better players with these features have been the most expensive, while the reasonably priced models have had a host of quality problems, especially in the area of progressive scan deinterlacing, that make them unsuitable for many discerning videophiles.

Given the above realities and impending technology shift, what do we do NOW? It doesn't appear to make sense to spend $500+ for a DVD player when HDDVD is around the corner and yet it's unacceptable to live with poor PQ on our HDTV's. Besides Oppo (good & bad reviews), who makes a high quality DVD player for under $500 that utilizes Component video? Some here have mentioned LG's most recent offering - what makes it and others better than Oppo?

Thanks,
DB
128x128dawgbyte
Post removed 
I bought the Zenith DVB 318 for $98. It upscales via component/DVI and has a very good picture via component. I am using it just as you describe to hold me over 'til fall when I'll get a Blu Ray or Universal player.
I have been using an HD Leeza for a couple of years with a cheap DVD player that has been modified to output in SDI. The signal is processed in the digital domain on thru to the projector- a 1 chip DLP by Marantz. The picture is far, far more involving, and filmic, than my old 3 gun NEC tweaked projector with outboard line doubler. I don't know what the Leeza goes for on the used market, but it might be worth checking. Also, aren't all those fancy Faroujda boxes that were 10-15k dollars now almost nothing on the used market? His stuff always looked good to me.
I'm a bit of a dummy on HT subjects, being fairly new to the game, but I can tell you that using the component video on an Oppo I won't be in any hurry to move to HD. Color is rich and satisfying, with deep blacks and reds, adjustable if it's too much. The highly-touted DVI connection looks washed-out in comparison (it may be a poor match with my NEC HT-1100 projector). I previously used a Denon 3910, but it wasn't even a close contest! Not the definition I get when watching HDTV signals, obviously, but nearly as satisfying--the Oppo (on component video) really brings the picture to life, at least for me. Of course, YMMV.
My 55" Hitachi plasma has a digital input, the problem is my cable box requires a digital output, therefore one of the cables going into the TV has to be component. I don't want to be forced into using the AVR everytime I watch TV.

Who knows though... most of the AV installers I've experienced don't have a clue. They know some things, but not others, so you get part of the story here and part of the story there.