Help. Wife says Teres 340 Is too bright.

Doug makes a very good point which I know but somehow did not come to the top of my brain when I posted. High quality, high resolution transducers (basically what your vinyl rig is, although technically its only the cartridge) will spotlight deficiencies elsewhere in the chain. In this case, downstream.

Yes, Doug. the 2500A is still in service. i guess i'm surprised that the 2500 would b the weak link since it has sounded so good in the past. I've been wanting to get into tubes for a few yrs now. AAMOF, I was looking for a tube preamp when I stumbled across the Teres and just couldn't turn it down. I've thought about SET but wonder if my room is too big? I don't know, though i do know that Silverline shows off their speakers with a 7-8 watt SET.

FWIW, my wife said she didn't want to hear me say that I needed another piece of equipment now because of the TT. So i'm just going to show her your post Doug, and let YOU get into trouble with her. But i do thank you for taking me off the hook on this one.
Again, thanks to all

Even later to the party ... heed Doug's observations and revisit your entire signal chain.

I strongly suspect that you are shooting the messenger (Teres / O-L / Benz). With your new vinyl rig, you have a lower noise floor which yields increased dynamics (bot micro and macro). You're going to hear a lot more - both good and bad, and this demands that you sort things out.

Amongst other things to try, I would not hesitate to swap out phono stages (you're running a Wright WPP 100C?). The Wright is a wonderful unit at its asking price, and I'd never argue against someone getting one, but your front end is now getting to the point where it deserves better (and is likely telling you this).

If Raul joins this thread, he'll correctly expound on the possibility that the energy being put out by your front end is resulting in input overload on your phono stage. This can sound like tracing distortion, but can also mask itself as other distortions. The phono stage is something you'll want to eliminate as a possibility.

I have no experience with your C-J amplifiers, but I'd heed Doug's advice on this as well.

Did I mention to get an arc protractor?

Cheers,
Thom @ Galibier

Thanks Tom. i am a firm believer in the necessity of a good phono preamp. You may be right about the Wright though it too has been a very good preamp. Even so, i understand that the chain is no better than its weakest link.

I agree with Doug. Before chasing down tweaks, go borrow a good tube amp. The CJ is a mismatch with the easy to drive Silverline speakers. The better resolution of your new table has exposed the mismatch, probably both in terms of distortion and odd order harmonics.

When looking for a tube amp for the Silverline speaker, you don't have to look for a high power tube amp. Since the Silverline is easy to drive, I do recommend looking for one with low or no negative feedback. Replacing the CJ with a good tube amp in your setup may be a revelation.

Do this excercise before changing the arm, cartridge, mat, etc.. IMHO, of course. Jeff