Help with Meadowlark Shearwater

The 7" woofer in one of my 2-way Meadowlark Shearwater has stopped working. Single wired using jumpers.
I checked without the jumper cable, and switched with the other speaker but the problem persists.
I disconnected the bottom and the wires at the terminals seem fine [pic] , so I suspect that the wires at the woofer came loose.
I removed the small screws at the woofer, but can't get it out to investigate.
Any suggestions?

If your reffering to the screws that hold the driver into the cabinet I imagine that the woofer is basically glued into the cabinet after how many decades?Gentle use of a commercial razor blade should work it loose...