2. tech-talk
  3. 180918-11799

I need an Audio Detective

Hello AG I have a unique situation with my audio system that I have no answer for. Here’s the deal. I was playing my Magnum Dynalab tuner and noticed my Denafrips Terminator 2 DAC standby light was not on. The power cord had come loose from the back so I snugged it up and the light came on. For whatever reason I hit the on button on the DAC and when I did it crushed the signal on my tuner. I cut DAC off and signal came back. I tried another tuner same result. Any ideas as to what is going on?

128x128jr96aolcom
erik_squires
16,059 posts
 

What do you mean it crushed the signal on the tuner?

 

russ69's avatar
russ69
3,507 posts
 

No clue really because I don't know what your preamp/amp/receiver/controller is. Most likely is that the control unit is switching inputs when it detects the DAC. That is often something that can be turned off. 

jr96aolcom's avatar
jr96aolcom OP
28 posts
 

I was playing music with a strong 9 on signal strength meter and no multipath. Cut DAC on and signal goes to around 3 and just noise like between channels. Cut DAC off signal is restored to a 9 and music comes back on clear as a bell. That’s what I was referring to with crushing the signal

More to discover