Is There A Big Difference Between Subwoofers From Different Manufacturers
This is likely the last thread I’ll be posting about subwoofers.
I was just wondering if there is really a big difference between subwoofers from different manufacturers if the quality of the subs (which is mostly governed by the specifications) are fairly similar. Also, with the assumption that the set up is properly done to ensure a seamless integration with the main speakers.
There have been many comparisons or experiences on subwoofers shared by members here on this forum, people who upgraded their old sub to a new seemingly superior sub. Or people who added additional subs to the system which contributed to an overall improved bass performance. I’m referring to the former, the comparison between single subs.
To cut to the chase, I understand high quality subwoofers which are essentially higher spec designs will usually produce better performance than lower spec subs. When people upgrade their subs, I assume the new subs are superior in terms of specification, either a larger sub with larger drivers, higher power output of the internal amplifier, lower frequency extension or the combination of any of the above.
Has anyone compared subs which are fairly similar in quality or performance when upgrading from the old sub?
Example. If someone upgraded from a REL T7x to an SVS SB-3000 or SB-4000, I suppose the SVS would be an upgrade since they come with larger drivers, higher power output, everything superior spec-wise. What if the models are closely spec’d? Will the subs sound fairly similar or closer to each other ?
Say, the comparison between
SVS SB-3000/4000
Rythmik F12SE / F15
REL S510 / S812 / Carbon Special or Limited
I presume the subs will still sound slightly different but the difference may not be night and day if the quality or specifications are closely matched?
some very knowledgeable replies on this thread.
I have an old Richard Lord REL , Stentor III, 55kg horn loaded , beautiful cabinet. it's-6db at 13hz. just a 10inch long throw driver. wish I had room for 2 but in my 14ft by 22ft by 10ft room it does a fantastic job with a lyngdorf tdai3400 and jern 14eh standmounts. |
Yes… VANDERSTEEN subs are terrific with their high-end crossovers. I’m hoping to upgrade mine to their current model as my next sub at some time in the near future. There is a 2nd part to the edited review I posted before. It highlights the prior VANDY model sub that is now upgraded further .
Enter the Vandersteen 2Wq 300 watt powered subwoofer. “…. This is the only subwoofer that is specifically designed to be inserted into the highest of high-end music systems without doing any harm to the precious signal. So how does Vandersteen do it? Simply. In fact his crossover scheme is so ingeniously simple that it’s a wonder nobody else thought of doing it the same way. I’ll spare you an in-depth description and just say that the only thing you end up inserting into your system is a couple of high quality capacitors. That’s it, nothing more! No additional wires or gadgets enter your signal path. Hell, you don’t even have to disconnect the wire between your amp and speakers to add this subwoofer. The model 2Wq sub uses the same basic crossover scheme as the $15,000 flagship Model 5As. As a matter of fact, you can even run the specially designed Model 5A crossovers (M5-HP) with the 2Wq if you want the most transparent sound imaginable. So what about the other reason to add a subwoofer to your system: for more powerful and extended bass? I don’t care how big your main speakers are, they’re no match for a good subwoofer in the bass. A really good subwoofer can run rings around the best floorstanding speakers when it comes to bass extension, power and control because it is designed to be good at that and nothing but that, whereas main speakers have to be good at higher frequencies as well. Ideally, you want two subwoofers so that you have true stereo separation down deep into the bass. Stereo subs can also help to lessen room interaction problems by providing two discrete sources of bass information. Remember, if you can’t afford to buy two subwoofers at once, you can always add the second one later. Adding a pair of 300 watt powered subwoofers is exactly like adding a pair of 300 watt monoblock amplifiers to your system and upgrading to a pair of better main speakers at the same time. The beauty is that you don’t have to replace your main power amp or speakers to do it. But there is a problem here as well. Everything comes at a price, and the price you pay with most subwoofers is that when you add them and their built-in amplifiers to your system, they don’t tend to blend or integrate well with the sound of your power amp and speakers. This is especially true if you own a tube amp, because the character of your amp is nothing like the character of the big solid-state amp that is built into most subwoofers. The result is that your system sounds split in half. You can hear where one part of the system leaves off (namely your amp and speakers) and where the other part takes over (the sub and its amp). This is a HUGE problem for audiophiles who aren’t willing to destroy their system’s coherence for additional power and bass extension. Fortunately, Vandersteen has the perfect solution for this problem that is, again, so simple, I wonder why nobody else thought of it first. His solution is to build a very powerful 300 watt amplifier that strictly provides the huge current needed to drive the subwoofer. You can think of this amplifier as only half of an amplifier; or just the power portion of an amplifier. The release of this power is controlled by the signal that is provided by your power amp. Vandersteen’s amplifier needs a voltage to modulate its current output, and what better place to get that voltage than from your main power amp? This way, your power amplifier is directly responsible for the sonic character of the deep bass coming from the subwoofer because it provides the necessary voltage signal. This voltage signal contains the unique and characteristic sound of your main power amplifier and insures that that character is maintained in the sound of the subwoofer itself. The beauty of it is that your amplifier is only providing a voltage reference and no actual current, so it is not taxed with the burden of “driving” the subwoofer in any way. As a matter of fact, your amplifier doesn’t even know that the sub is connected to it. The 2Wq’s potential is almost unlimited given that it will ratchet up its performance as you improve your power amp. Remember that you always want your subwoofer to sound just like your power amp. No better, no worse. NO DIFFERENT! After having spent time with the amazing Vandersteen Model 5A loudspeakers with their 400-watt powered, metal cone subwoofers, we were reminded of the sound we had with the awesome Audio Research Reference 600 mono power amps. With the Ref 600s there was a sense of effortlessness, openness and unrestricted dynamic freedom that we have only otherwise heard with live unamplified music. Listening to those monstrously powerful amps made us realize that all other systems sound compressed by comparison. Only when we heard the new Vandersteen Model 5As with their hugely powerful built-in subwoofers, did we again have a strikingly similar sonic experience. The reason is that the Model 5As provide a total of 800 high-quality watts, to which you have to remember to add the power of the amp we were using, the ARC VT-100, at 200 watts. This means we were listening to about 1000 total watts of amplifier power – not far from the 1200 total watts provided by the Ref 600s. With the Vandersteen subwoofer crossover and amplifier, you are able to get those hundreds of subwoofer watts to blend seamlessly and even take on the character of the ARC VT-100. It’s amazing! What’s even better is that the price of the system with the Model 5As and the VT-100 is under half the cost of the Ref 600s alone! Since this discovery, we have achieved the same kind of unbelievable dynamics and seamless blending with ProAc loudspeakers and twin Vandersteen 2Wq 300 watt powered subs. So, if you want the sound of Ref 600s but cannot afford them, buy a pair of Model 5As or your favorite pair of ProAcs plus a couple of 2Wq subwoofers and mate them with a VT100 and you’ll get surprisingly close. You can cut the cost even further by running a pair of Vandersteen 2Wq 300-watt subwoofers with your existing speakers. Or mate a pair of 2Wqs with your favorite ProAc. In any case, it is the magic of SUBWOOFERS that allows this to happen. It is for all of the above reasons that there is only one subwoofer in existence capable of integrating seamlessly into a high-end music system, allowing you to reap all of the benefits of having a subwoofer, with none of the drawbacks. And the Vandersteen 2Wq is the one. And just in case you think I am a biased source, our correspondent Blaine Peck (who, for all you know is also a biased source) recently wrote the following, with no discussion between us about the topic prior to his sending us his comments. Whether reproducing the plucked string of an acoustic bass or the sound of an analog synthesizer, the Vandersteen 2Wq subwoofer is a seamless extension of any system. Nothing else need be added! With its internal 300-watt power amplifier, it is the perfect compliment to any sound system. Designed to take on the characteristics of your main stereo amplifier, the amp in the 2Wq will not sound foreign in your system. Also, through an extension of the Vandersteen design philosophy, a unique gradually sloping crossover system is implemented so you simply do not know where your main speakers stop and the 2Wq begins.
Now that your main speaker/amplifier combination need not concern themselves with those power demanding low frequencies, they are freed up to work in a more comfortable range. Yes, now what is coming from your main speakers will sound better than ever.
The 2Wq is not just another subwoofer. It consists of three 8″ floor-facing drivers, each with a massive motor. So why not a more typical single 12″ or 15″ design? Well frankly, the mass of a larger driver will not allow it to respond as quickly as the Vandersteen 8″ drivers to today’s demanding recordings. The 2Wq’s 8″ drivers are designed to handle the content but be “fleet of foot” at the same time. Concerned about where to put them? You need not worry. With the control of both its respective level and the “q” (how loose or tight the low end is) you have the flexibility to place them in a location that fits your living environment and not sacrifice performance. The simple beauty of this product will soon become an addition to your room.
So whether on orchestral music, hard rock or something in between, the Vandersteen 2Wq will exceed your expectations…” |
@akg_ca Spot on It’s simple to add a first order passive HP to roll the lows out of the mains. The -3dB point should be slightly above the mains’ anechoic -3dB. Doing so effectively doubles the power available for the rest of the spectrum. Polystyrenes, while hard to find today, are preferred. That being said, most subs today are missing some of the necessary controls
The Martin Logan X series has some of the above. The rest can added, if necessary, with external DSP. A failing of the ML series, other than Chinese origin, is insufficient mass. 10kg weights, while not particularly Audio Salon, are effective:
|
