@ricevs wrote:
The Jubilee is time aligned in the electronic xover......so this is the only Klipsch done correctly
It is any horn speaker done correctly, and configured actively it is the way to go - fortunately an approach not exclusive to a Klipsch speaker.
no wonder the designer says he thinks the Jubilee is way, way better than anything before.....and you have the tweeter and mids coming from one place
Maintaining a point source from the lower mids on up is indeed the main takeaway. The Jubilee’s does so with the (re-branded?) Celestion Axi2050 without a crossover point in its region all the way up into the upper octave, though it does seem to need some attenuation up there. A coaxial, dual concentric diaphragm approach on the other hand from the likes of BMS (and, I guess, more a less copied by JBL for their version of it) would likely have a more (without needing attenuation) extended upper range with a smaller, dedicated diaphragm here, however necessitate a crossover point somewhere in the upper mids - while still being a point source. Then again the Axi2050 has the more extended, and less distorted lower range via its larger diaphragm meeting the bass horn, arguably the more important parameter in conjunction with the big K-402 horn, which is also more appropriately sized compared to its smaller Klipsch brethren.
Active config. for proper delay adjustment and better amp-driver control, larger horn size for more proper horn loading and directivity control, and maintaining a single point source in a vital frequency spectrum - that’s certainly Klipsch doing right by following physics and common sense here, kudos. While I haven’t yet heard the Jubilee’s and can’t comment on their sound, I do find their solution with a ported/horn-loaded combo approach in the bass horn (in want for more extension) somewhat conspicuous. Ideally I’d have gone with a classic front-loaded horn design (with the woofer mounted in a sealed chamber) and firing into as few, preferably only 90 degree bends as possible, while leaving the two lower octaves down to 20Hz to a dedicated pair of (tapped) horn subs. But then again that makes for more complexity and a less saleable package - decisions, and compromises.