So just wondering if you have any kind of wire stripper? Have you ever stripped the jacket off a wire? We’re definitely not going to take apart those nice XLR cables, but I’m wondering, before we go any further, what your skill level is here, so I know how to further direct you?
Low buzzing through speaks
Hello All,
Need some serious help here. So I just (upgraded?) from a Marantz AV8802A to a McIntosh MX122 preamp. I also just got brand new Revel Performa3 speaks all around (5 channel setup). I disconnect everything from the Marantz and then into the McIntosh, connect the speaks and I have a faint buzzing through all 5 speakers (that was not there previously). I have everything plugged into a Furman Elite 20pfi power conditioner which is plugged into a dedicated 20 amp circuit. My power amp is a Simaudio Titan HT200 5 channel. This is not going through the Furman but directly into the other outlet on the same 20 amp line. I even tried plugging the Sim amp into the Furman to see if that helped-no change faint buzz is still there. I have unplugged just about everything, and the buzz is still there. It is very faint and does not get louder when I turn up the volume. Again it is faint and you have to put your ear up to the speaks to hear but it is definitely there. I have tried so many things and nothing gets rid of it. It is not my cable box (I did have that issue previously with the Marantz but as soon as I unplugged the coax from the box it went away so I just bought a coax loop eliminator connected the cable to that and noise was all gone) as I unplugged that and started there.
Any help would be so sincerely appreciated????
- ...
- 127 posts total
Thanks man, skill level is novice, I'm already over my head as soon as we get past connecting stuff, sorry😯...I have stripped the jacket off of a wire before but yeah definitely don't want to play with that with the Transparent cables...
And yes, the buzz would have been there I just didn't put my ear up to that speaker but as soon as I plugged the 2nd rear in the buzz was there in both speaks at the exact same level whether 2 are connected or all 5. This buzz is steady, doesn't fluctuate...guess that's a silver lining😬 |
Thank you for being honest and admitting that. There’s only two more things I can think of at the moment that I’d like to try, and one requires a different XLR connecting cable (which removes the shield connection - pin 1 - on one end). I can actually make them myself, but let me see if I can find something on the internet for you. The other is I’d still like to hear if there’s any buzz with that ground wire connected between the two rear panel ground screws. Is there any small cable laying around (like a small extension cord) you could butcher and sacrifice? If you don’t have a wire stripper, with a little guidance, a scissors could probably perform the same function. Do you own any other XLR cables? If so, have you tried them to see if they produce the same buzz as the Transparent's do? |
This would be an example of a device that lifts the shield on one end of the XLR cable. Female to XLR Male Ground Lift If willing, it would be interesting to see if this connector would produce any different buzz sound results when plugged in using just one XLR cable. |
Thanks so much again @dpop! Unfortunately I do not have any other XLR cables. I do have some old speaker wire I can hook up though. Does it matter if I use the positive or negative to connect the 2 units with the ground?
You wouldn't by any chance live near the NH area would you? Be happy to pay for your services to come out, LOL! |
- 127 posts total