Lyra Atlas experiences

@mijostyn Thanks for the suggestions, but they have all been addressed. I have already adjusted azimuth, using an acrylic gauge and confirmed with my Fozgometer (which should always be run with a fresh battery for accurate results). Lyra suggests setting loading by listening with ear: they don’t specify a value for it, because that varies with tonearm cable and phonostage used. In any case, my Naim Superline phonostage is quite up to the task of what this catridge has to offer.

My turntable is on an isoAcoustics Delos, and I use both an HRS 850gr clamp and Clearaudio’s 1500 gr outer limit ring.

I’ve got it all covered, thanks. I’ve been around the block a few times. :)

@dwette , Great. One comment. The only thing record weights do is wear out your bearing faster. Add the weight of the peripheral clamp and you increase the wear rate even more. The good reflex clamps obviate the need for a peripheral clamp and do a better job of flattening the record. They are used by SME, Kuzma, Dohmann and others. The only thing better is vacuum clamping. 

@mijostyn

Thank you for your feedback, You might want to read up on my turntable a bit more before getting too critical of how I use it. I might look dumb but I do kind of know what I’m doing. LOL

You are wrong about the risk of bearing wear regarding this TT and how I use it. The Clearaudio Ovation has a ceramic-magnetic bearing, and is designed to accommodate the weight of the clamp and outer ring with no consequence on wear, because the platter floats magnetically on the bearing spindle, making no contact at all from the top. It would take far more force to make the platter bottom out on the top of the ceramic bearing than the 2350 gr I am adding. In fact, Clearaudio makes a clamp of about the same mass, and the outer limit ring I use is theirs, and approved for use with my turntable. My use case is all within their design spec.

I am aware of reflex clamps and vacuum clamping, but I am good to go with what I have. I’ve used it that way happily for years. The clamp and ring I have do an excellent job keeping my records flat and coupled to the POM platter. I see no reason to make any changes in that regard.

@dwette A very encouraging complimentary write up, on the early usage of the 'LAL-SL'.

I can only see the smile increasing and the enthusiasm topping out, as you go over the 100ish Hour of usage marker.

Happy Listening   

@pindac Thank you. Trust me, the grin is very much ear to ear at the moment. I am closing in on 50 hrs. and I think it has already opened up and shown what it is capable of. That jives with what a friend who knows this cartridge (non-SL) and the mono version tells me (he uses both to evaluate test pressings professionally).

Interestingly, I also upgraded my subs from a pair of REL R-328 to a pair of S/510 earlier this month, and as they break in more I am enjoying the music that much more.