Hi again, Mark -
No problem with using the High-gain setting if you are not running into overload problems - go ahead and use the setting you like best. One thing you might try is loading your Glider with something below the standard 47KOhm input load. You could try loading resistors in the 10K / 5K / 1K range, for instance. It is possible that you might find an input load that will reduce the drive level slightly and improve the sound quality. See what you think.
Best regards,
Steve McCormack
www.SMcAudio.com
No problem with using the High-gain setting if you are not running into overload problems - go ahead and use the setting you like best. One thing you might try is loading your Glider with something below the standard 47KOhm input load. You could try loading resistors in the 10K / 5K / 1K range, for instance. It is possible that you might find an input load that will reduce the drive level slightly and improve the sound quality. See what you think.
Best regards,
Steve McCormack
www.SMcAudio.com