After some experimenting last night I found that the Pass plugged into the wall, a dedicated circuit using 10awg copper with a Furutech outlet sounded superior to the PS Audio PPP. Thanks guys for the confirmation.
Too bad about the balanced interconnects sounding superior to the single ended. I hope to prove that wrong as I wish to use the balanced outs on my Cary SLP-05 pre to the Fathom F113's and the single ended cables to the Pass. Having mostly home brews but of significant quality, I'll be rotating cables until I get a handle on what I'll need to further the SQ.
Anybody want to drop by with some cables ;-)?
I made some crude jumpers last night and used my DIY RCA's which sounded great. I tried another pair and whooah sounded like crap. I mean crap. I went to the back of the amp and noted that one of my jumpers fell out. Now I know what jumpers mean to this amp!
What I'll do today is to grab some gold pins from a Burndy trim trio connector and 3 twists of 24awg gold plated jewelery wire and make some jumpers. I try that against the simpler 12awg copper approach.
Thanks.
As the night wore on and I played with setup on the system and sub I found a really nice balance and settled in to some of the best sounds I've heard. I took a room measurement using the Mobile USB Pre and RTA software and saw an amazingly flat response. 1 dip at about 180hz with a slight bulge at around 50 which I could dial down with the Fathom. But generally flat from 20Hz to 20KHz where it dropped very suddenly. It seems the Esotar tweeters I'm guessing don't sing beyond 20Khz?
I've got some very nice power cables but not of the cost of the Shunyata's. Looks like I'll be looking at the used market soon for a power cable.
Too bad about the balanced interconnects sounding superior to the single ended. I hope to prove that wrong as I wish to use the balanced outs on my Cary SLP-05 pre to the Fathom F113's and the single ended cables to the Pass. Having mostly home brews but of significant quality, I'll be rotating cables until I get a handle on what I'll need to further the SQ.
Anybody want to drop by with some cables ;-)?
I made some crude jumpers last night and used my DIY RCA's which sounded great. I tried another pair and whooah sounded like crap. I mean crap. I went to the back of the amp and noted that one of my jumpers fell out. Now I know what jumpers mean to this amp!
What I'll do today is to grab some gold pins from a Burndy trim trio connector and 3 twists of 24awg gold plated jewelery wire and make some jumpers. I try that against the simpler 12awg copper approach.
Thanks.
As the night wore on and I played with setup on the system and sub I found a really nice balance and settled in to some of the best sounds I've heard. I took a room measurement using the Mobile USB Pre and RTA software and saw an amazingly flat response. 1 dip at about 180hz with a slight bulge at around 50 which I could dial down with the Fathom. But generally flat from 20Hz to 20KHz where it dropped very suddenly. It seems the Esotar tweeters I'm guessing don't sing beyond 20Khz?
I've got some very nice power cables but not of the cost of the Shunyata's. Looks like I'll be looking at the used market soon for a power cable.