2. amps-preamps
  3. 176422-76351

Peachtree GaN 1 Beta

Before I start my post here is my current system for reference:

Auarlic Aries G1 --> Denafrips Terminator or SW1X DAC --> Audio GD HE1 XLR preamp or Sachs preamp --> various tube amps --> Cube Nenuphar Mini's w/ a pair of REL S510 subs. Cables and power conditioning commensurate with the rest of the system.

__________________________________________________________________

As warmer months approach I have been looking for a cool running amp to replace my Line Magnetic LM-518 and other tube amps for a few months as they run pretty hot.

I've been interested in the GaN FET amps and just purchased a used LSA Voyager 350 Gan FET amp which I should receive in a few days. I've tried class D amps before and while they checked a lot of boxes I just didn't feel drawn in. However, I like to explore so I figured I'd try the GanFET and since the amp has zero feedback and my speakers seem to prefer amps with little or no feedback I figured it be worth checking out.

Today, Peachtree Audio sent out an email inviting users to a beta of their new Gan 1 amp. Here are some excerpts from their email:

 

What is the GaN 1?

In basic terms it is a 200 Watts-Per-Channel (WPC) Power Amplifier designed to be the sole interface between your digital audio device with a variable output, like a Bluesound NODE, and your speakers. The GaN 1 is a simple, pure and cost-effective audio solution: connect the GaN 1 to a streamer and a pair of speakers and you have an amazing Hi-Fi system. That's it...no DAC, no preamp and no input switching. The signal path from the music to your speakers is remarkably short and free of artifacts. Want to hear the intricate details in your music that have always been there, but you couldn't quite make them all out before? Then the GaN 1 is for you!

What makes the GaN 1 so special?

First and foremost is the GaN-FET amplifier module. It has several inherent advantages in a power amplifier that even the best MOS-FET designs simply cannot achieve. A GaN-FET power stage provides a precise high-power reproduction of the Class-D PWM signal with extremely high linearity. This linearity eliminates the need for ANY feedback, ultimately allowing for the best possible audio quality providing clean, clear middle and high frequencies and a tight, solid reproduction of low frequencies. GaN-FETs track the complex audio waveforms MUCH more accurately than MOS-FETs, resulting in significantly more transparent and natural sound. The difference is something even a casual listener can hear and appreciate. The GaN 1 is also designed so that it does NOT require a digital-to-analog-converter (DAC). The digital audio signal at the input directs the amplifier outputs to drive the speakers. Although DACs have continued to improve over the years, there is no DAC better than NO DAC! This concept is not new as similar devices known as "Power DACs" made quite a splash in our industry years ago. But this time around, by executing the concept with GaN-FETs, the bar is raised to an entirely new level.

Key Features at a Glance:
▪ 200 WPC state-of-the-art GaN-FET module
▪ ZERO feedback design
▪ Regulated 450-Watt power supply
▪ Coaxial S/PDIF input with native support up to 24-bit / 192kHz
▪ DAC-less design
▪ Power on/off trigger port
▪ All aluminum chassis
▪ No cooling fans

 

This sounded really interesting to me and since I have a good streamer I signed up for the amp beta only. One aspect that intrigues me is to create an extremely minimal signal path. My speakers are single driver, crossover-less design. Employing the GaN 1 will mean the system will be Auralic Aries --> GaN 1 --> Cube Nenuphar Mini's. Will that lead to a more engaging sound vs the full system? Will the Voyager GaN 350 outperform a tube amp in the full system? Who knows, should be fun to find out....

Now, I have no idea how either of these GaN FET amps will work with my speakers. The Cube Nenuphars seem to prefer amps with low damping and no negative feedback, which is more common with SET tube amps and Class A solid state amps. I'm not sure of the damping factor of the GaN FET amps, but both are Zero feedback designs, and both have way more wattage than I need. For reference, I have a 1.5 wpc 45 tube amp that sounds amazing with the Cubes, so high wattage is not required. I am interested though in what these amps will sound like compared to my tube amps, and I am particularly interested in what the streamer direct to amp Peachtree will sound like.

I am also looking to acquire a First Watt SIT-3, which is a great match with the Cubes, but now that they are no longer produced prices have gone above my current comfort level. If I can get one I will throw it into the experiment.

The Peachtree won't be shipped until sometime in June, or possibly later. In the meantime I will get the LSA Voyager in the next few days. I might even be able to get it hooked up this weekend so stay tuned, should be an interesting experiment...
abd1
donnylovely
105 posts
 

@yyzsantabarbara user the high level inputs on that sub 

yyzsantabarbara
4,977 posts
 

@donnylovely Yes, I think you mentioned it previously on this thread. I did some research on this and now I forgot what the heck I learned. I will re-visit that later today.

I did get in a second set of Audience AU24 SX speaker cables today, though it is very short (2 feet). I now have 2 sets of speaker cables to try and integrate the sub. I think that is all I need to do that.

I am using some WyWire "Silver" speaker cables on the GAN1 + KEF LS50 Meta, at the moment. These were very boomy with my AHB2 but not so with the GAN1. Likely needs more break in to get that bad boomy sound. My Audience AU24 SX cables and Audience FrontRow (only for AHB2) are not boomy at all with the AHB2.

donnylovely
105 posts
 

@yyzsantabarbara you can just use cheap speaker cable for the sub that you can pick up at a hardware store. I wouldn't spend a lot on that.

yyzsantabarbara
4,977 posts
 

The amp has opened up a lot and now the bass is comparable to my AHB2. That is using the WyWire speaker cables that are exaggerating the bass. The GAN1 is now doing the same thing (that is good).

I still think the GAN1 is still a little more laid back over my AHB2 system on my KEF LS50. A lot of people may prefer that sound. If I did not have my AHB2 system, that I love, I could see myself living with the GAN1 as the system in my office. However, now that I have 2 great tuners, and that is a huge part of my listening routine, I will not use the GAN1 in my office with the LS50 Meta. It will go with my RAAL SR1a headphones. I am going to be listening to this amp like that going forward.

I have not listened at low volume or with a variety of music, I will do that with my SR1a headphones, which are an even better speaker than the LS50 Meta and see how it compares to the 9 or 10 other SR1a 2-channel amps I previously had in the house.

I will put it back with the LS50 after I have a few 100 hours on it.

 

ricevs
1,543 posts
 

What is the chain when you use the Benchmark?  Benchmark DAC3?, Benchmark pre?, Benchmark amp? with two analog cables?.....total cost? compared to $1400 stock GaN 1?  What power cords, footers and line conditioning are you using?  Do you have any damped weight on the Gan1?  Will be nice to hear what you say when it is fully burned in and also after you get it modded (rubbing my hands together in anticipation....he he).

You guys really need to use the Giandel 5000 watt inverter run on LifePo4 batteries.....will blow your mind.....so pure and open.

More to discover