Powering off vs leaving on

If a component fails because of switching it on and off too often, then it is not well design or have mediocre parts. Some examples of electrical things that switch on and off quite often that can last years (in some cases, decades) are the refrigerate that cycles on and off dozens of times a day, your TV, car, cell phone, etc. Some may say that audio components are more sensitive, then that goes back to asking, why? Maybe because that parts aren't designed to be as robust as it should be. A sensitive device that gets gets switch on and off and subjected to electrical surge upon turn on is the sensitive filament in light bulbs. But you are told on the packages how many hours to expect from them, they are designed to last only so many hours. So when I read that those that keep their components on because of fear of shortening their lives, then we really don't have confidence on their design. Buy a Bryston, turn it on and off all you want and sleep peacefully for at least 20 years.

I won't repeat any of the sage advice above except to say that I'd agree with leaving the SS on and turning power tubes on and off if you aren't using them for longer periods.

As a note of further info, should you be curious or want to try to convince the wife or S.O. that it's not too expensive - there are simple devices available to directly measure power consumption when plugged into a wall outlet. I've been using one to monitor a few of our appliances to figure out why our electric bill is rather high. The one I purchased is a "Kill-a-Watt" which costs about $35 online. Once plugged in you plug in the appliance you wish to monitor. The timer starts running as soon as a device is plugged in. Over whatever period of time you leave it plugged in it will measure the amount of electicity in Kwh (killowatt hours) that the specific device has used, and over what period of time it consumed that amount of power. You can then translate that into usage per/day/month/year/etc. and put a dollars and cents amount to the use based upon your local rates. I tested my home rig, consisting of a 100wpc SS amp (class AB/A), A DAC, and a transport. In my case I tested over a 24 hour period with typical use, and all components on 24/7. The results? With our rather expensive urban summer rate averaging around .07 cents/Kwh the entire rig costs about 13 cents/day to leave on. In contrast our fridge costs about .18 cents per day to run 24/7. YMMV widely regarding your rig depending upon just what you are running. Class A gear is going to cost significantly more to leave on. I don't think transports and DACs cost more than a few pennies a day. So if you are concerned or just curious, for $35 or less you can find out. I even came across a DIY version of an electrical consumption meter online, but lost track of the URL.

Marco

KKM, my concern was wear on the tubes and sonics. But I do not think you post was aimed at me. I agree with you. Well made gear should be expected to both stand up to 24/7 duty cycles, as well as being switched on and off.

But sometimes, even with heavy duty stuff, there is something to be said for (extra) logitivity by keeping everything "hot" all of the time.