2. analog
  3. 166435-98013

recommendation for a high end analog system

I never had an analog system until last month. I bought a 1989 SOTA TT with vacuum/Sumiko MMT arm/Dennon 103R retyped with elliptical/sapphire cantilever. My phono is Kitsune MK5 WBT that is amplified by Don Sach 2 tube preamp and Pass X350.5. My speaker are Sound Lab M545 ESL. The TT has been very   well maintained despite its age. It sounded very good until I heard my friend's system which has the same TT but with Lyra Skala cartridge and first generation Triplanar arm (Spectral pre/amp). His sounded noticeably clearer and fuller. What is the best way to get a noticeable improvement in my system without breaking the bank (or before I have to squint to hear the improvement). I would love to hear some wisdom from analog-philes.
128x128chungjh
chungjh's avatar
chungjh OP
265 posts
 
I am embarrassed to admit I never checked the azimuth, zenith... because I don't really know how to do it. I just trusted the person who sold to me. He seemed to be very knowledgeable. The recommended tracking force is 2.5 gm. I am concerned that such high tracking force will gouge out the LP over the years.
Post removed 
chakster's avatar
chakster
6,144 posts
 
Tracking force recommended by the cartridge manufacturer in the manual, there is a range, follow the manufacturer’s recommendations.

There are cartridges like Ortofon SPU with much higher tracking for e up to 3-4g.

2g tracking force is standard for most of the MC cartridges, for high compliance MM it can be as low as 1.2g

Anyway, if you ignore manufacturer’s recommendation then less tracking force can be worse for your records!
Ag insider logo xs@2x
rauliruegas
13,093 posts
 
Dear @chungjh : I think that main differences could came from two items: cartridge and phonolinepreamp.

The Skala is superior to your Denon that you can change it for a Lyra Kleos and due that I never listened the phonolinepreamps you own but I know very well Spectral then through your electronics you can improve what you are achiving rigth now and one option for overall electronics could comes from Pass that by coincidence you already own at your system’s amp. Maybe could help too to make an internal tonearm rewiring.

Regards and enjoy the MUSIC NOT DISTORTIONS,
R.
russ69's avatar
russ69
3,520 posts
 
"...less tracking force can be worse for your records!..."

2.5g is fine. 
More to discover