Slindie Rabco arm

There was a David "Shreve" that did some excellent mods on the Rabco tonearms. Many reviewers used his arm. The Shreve/Rabco tonearm was the one to own for awhile.

If I remember well there was an watchmaker in the USA
who used ruby bearings for hes mods.
In the Netherlands this tonearm was very popular (I still
own one) but the most mods intended the weight-reduction;
balsa-wood,different tubes (qua weight), etc.
There are still persons from here who swear by this tonearm.

Cheers

David Shreve was a friend of mine and I was lucky enough to use one of his arms - one of the few older audio products I'm really sorry I no longer have.Anybody know if he's still around (e-mail address? -if so please e-mail it to me - don't post).
Slindie mod consists of wood low mass arm "tube"actually a three sided trough ,convert drive to belt drive from nylon chain drive,convert from wire sensing switch for lateral motion and to trip cue in run out groove to opto couplers ,smoked plex arm tray instead of metal.smoked plex motor/RCA jack box,All Nylon bolts to hold everything together - points for using one size of commonly available hardware for all the mechanical assembly.
Oracle Delphi mod is pretty extensive as well: New plexiglas bottom plate/bearing/motor support , new top arm plate optimized for SLT arm -no arm mounting platform as such- four pillars instead of 3 , no dust cover .Excellent isolation from footsteps ,etc.
Running a new Denon DL-301-II into a B&K Phono 10 and out the digi on that into a Benchmark DAC.
Very nice result - great way to listen to those thousands of LP's that have been in storage for the last 10 years.

slindee@charter.net

David Shreve in southern California has worked on and modified Rabco arms for several decades. One of the really great guys in the business.
Email me for his contact info.

Brian Walsh

David Shreve sent me some links after I met him at this year's RMAF. I thought they might be of interest:

Link to site with pictures from the ETF 2004

http://www.tnt-audio.com/shows/etf04_e.html

Links to sites mentioning my adjustment of VTA

http://www.theaudioeagle.com/columns/schall_rauch_2_oct_2008.html

http://www.theaudioeagle.com/columns/vienna_vibes_2010.html

Hartmut’s article describing adjustments in his home in Munich

http://www.tnt-audio.com/sorgenti/vta_method_e.html

I am the original owner of an unmodified Rabco SL-8E and need to find someone to repair and upgrade it. Most recently the linear tracking servo has failed. Beside David Shreve is there anyone else doing similar repairs. We live in Maryland and would prefer to find someone closer to home if possible.