It sounds like some good advice. Not to invasive. I get them back in my hands June 1st so will diving into them then.
Thanks
Thanks
Snell E type ll crossover rebuild thoughts
I highly recommend going with good film in place of the Electrolytic period. As Erik said, there are several Electrolytic in the tweeter circuit alone. If I recall correctly, Peter used series crossovers in these speakers and I could be wrong, but if they are indeed series. ESR can easily be compensated. There are a couple resistors in there, changing all the Electrolytic to film won't change total resistance by more than maybe .25 ohm per leg. You can easily add that to the resistors that run next to the Electrolytic. So measure ESR on the caps and add that total resistance to the resistors that follow and rock on. Also, Erik recommended the DATS 2, the DATS 3 is out and the same price, you might as well get the new version. I hope this helps, Tim |
Snell E type ll crossover
schematics https://www.audiocircle.com/image.php?id=148157 https://www.audiocircle.com/image.php?id=148158 |