Solid State Preamp to replace tube unit

I run a Premier 14 in my main system and haven't needed to change a tube in years - wonder why you are having issues?  (My Premier 11a power amp in the same system has hit a spate of Chinese tubes that haven't been as reliable as the Gold Lions, though)

Gard to suggest a solid state preamp that has the sound of a tube preamp!  Maybe a Klyne?  SK5 or 5A?

All. I believe my issue is that I purchased some of my tubes on ebay and some as "pulls" from well known tube suppliers. Now the tube suppliers are not at fault because when they were tested they were fine. BUT, they were not NEW. Thats not on them Its on me. I now will only purchase new tubes and see how that goes. To Be continued

I believe the Philps PCC88 tube that I linked earlier (Tube Depot) is/was being sold by c-j.  If I'm not mistaken, I was told the c-j buys that particular tube.  Below is a link from a post on another forum. That was one person's experience with tube rolling with the ET-5.  From what I've read, it is harder on tubes than some of the other c-j preamps.  The tubes in my PV-14L lasted for 10+ years.  I didn't have the Premier 17LS2 long enough to burn through any tubes. 

I am reporting back as promised. The tube I am using is the Philips E88CC, a NOS military tube from the 1960s. Jeff at cj can supply them. They are the best tube overall that I have tried. They sound warmer overall than the EH and hold up just as well. The EH tube is good too, sharper, brighter.
The Gold Lion 6922 sounded great, perhaps the best of all, but it got noisy very quickly.

jimbones

if it has a volume control then should be easy to try it out. take the preamp out of the system. 

I too, got tired of the hassle of tubes. I went with a SimAudio Moon P7. For me, it was a great choice as it checks the boxes of what I like.