Sound room flooring advice needed

Look just float the hardwood to the floor. That is the right way to do it. Then put some nice through rugs down. If you have resonance problems them look for better speakers, ones that don't use big bass drivers. I am a dealer for Wilson Benesch. They are made from carbon fiber and the cabinets do not resonate and excite the room or the floor.

Gluing to a concrete basement floor is a mistake due to wicking moisture.

Zenblaster, solid hardwood floors, of course, cannot be glued down below grade. But in talking to contractors and doing research (okay, on the web), I've learned that engineered hardwood flooring is designed for this application, provided a proper moisture barrier (4-6 mil of plastic) is under-laid. Are you saying it's still a bad idea?

I'd certainly rather do a float if only because I could leave the old linoleum squares in place. My gear and Adona racks are pretty heavy; my 90 lb Sound Anchor speaker stands don't pass much resonance that I can sense; one of my turntables has a 100-pound plinth and the other is on a Minus-K isolation platform, so I doubt they'd be much affected by footfalls or vibration. I'm not certain that resonance would be a problem with a floating floor, especially using a dense foam underlayment. But my system has evolved and been tuned while being spiked to the slab, so I don't want some big sonic curveball. Obviously, I want to get the flooring right the first time.

I'm not certain that resonance would be a problem with a floating floor, especially using a dense foam underlayment. But my system has evolved and been tuned while being spiked to the slab, so I don't want some big sonic curveball.

Indeed. I can't say from experience whether you'd have resonance issues or not (though like you I'm inclined to think not). But you're accustomed to speakers which are firmly fixed to an immobile floor. Any compromise there will let the speaker cabinets move, and that softens dynamics and smears each waveform launch.

I've heard this in many setups including early versions of my own. The slightest elasticity beneath a speaker is audible. A floating floor might be preferable in the listening area, but not beneath the speakers.

I had a similar experience but in reverse. I had my system in a second floor apartment and moved to a house where I have a dedicated listening room in the basement with carpets directly on the slab. In the apartment I had to plug the speaker ports to keep the system from sounding too boomy and in the basement I had to remove the plugs to keep it from sounding too thin. From the mids on up the sonic signature was similar, but from the upper bass on down the difference was staggering. There are obvously lots of variables here (although the rooms are similar in size), but the point is if you've got your system sonically where you like it on the slab you might hear something much different on a floating floor.

I'd recommend some kind of moisture barrier and a relatively thick indoor/outdoor (i.e. mold resistant) carpet to avoid using padding in case moisture ever becomes an issue (which, in a basement is not all that unlikely for any number of reasons). If the carpet gets damp or wet you just dry it out and put it back, but padding will have to be replaced. Depends on your situation. Hope this helps and best of luck.

Bill, Zenblaster is spot, I just did this last year and it sounds great. Best of luck...