SS Budget "Tone" Integrated Amplifiers


In your experience, what are some good, inexpensive solid state integrated amps that give good tone / density? Is there such a thing? I'm done with tubes (for now) and spending $$$ chasing unicorns instead of listening to music. But I like instruments to sound like they should and not have poor recordings (which IMO are most) ruthlessly revealed. I can think of Sugden but it's all but Covid unobtainium right now. What else?
greg7
I really liked my Arcam FMJ-A19. Great phono section. Kinda warm sounding, paired well with Paradigm's which were a bit forward. Probably will work well with B&W's and KEF's which also sound forward, to me.
@mermaid_smiles -

So, all I know is that you have a small room.  Don't know your budget or what you like to listen to.  I had the Rega set up in a 15 x 10 x 8 1/2 room.  It played plenty loud without coaxing the volume control much.   

I have recommended speakers mostly in the $1K range because I am in my 60's and don't have too many claims on the few extra bucks I have.

Speakers that I thought matched well with the Rega Brio ...

Omega Super Monitor 7 MKII - 

https://omegaloudspeakers.com/collections/monitor-speakers/products/super-7-monitor-speaker?variant=...

Golden Ear Technologies BRX Monitors -

I would think that GET's AON2 or AON3 would work out well

https://www.crutchfield.com/S-U2GuYE7A0hR/p_317BRX/GoldenEar-BRX.html?XVINQ=GLX&awkw=12431007469...

Zu Audio Dirty Weekend - Crazy good and enjoyable.  2 buts - there is a wait for them (unless you find a pair used) and  they are floor standers and may be too big for your room.  

https://www.zuaudio.com/loudspeakers/omen-dirty-weekend-ii

There is also a pair of Opera Mezza listed here that would do very nicely with the Rega.

https://www.audiogon.com/listings/lisaa812-opera-loudspeakers-mezza-with-mit-cable-package-monitors

Best, 

Rich 


I have a Rogue Sphinx v1 upgraded with Mullard cv4003 (12au7) tubes. It sounds awesome. Tons of power. It's a hybrid Integrated amp with two tubes for preamp and solid state for the amp. You may be able to get a used one for around $900 to $1000.