Your option 3 using an XLR-RCA adaptor between the CXN and the L 12.
The XLR input on the Aegir is for monaural balanced connection only.
The XLR input on the Aegir is for monaural balanced connection only.
Sub wiring help, high level speaker terminal to RCA line level Sub inputs
I just received a new Rhythmic L12 sub, and surprisingly did not realize it only has RCA line level inputs. I had purchased it thinking it also had high level speaker inputs to connect it directly to the speaker posts on my power amp.
I have a Cambridge CXNv2 connected to a Schiit Aegir Power Amp through the line level RCA. Now, the CXN does have an additional balanced XLR out, but I can only connect the Schiit Aegir through RCA.
So these are my options and questions:
1. Connect the Power Amp to the Sub using a custom cable with speaker terminals on one end and RCA on the other end.
2. CXN XLR --> Power Amp RCA, and CXN RCA --> Sub RCA
3. CXN RCA --> Power Amp RCA, and CXN XLR --> Sub RCA
4. Return the Rhythmic and get an SVS SB1000 with high level speaker inputs.
In this case I’m not sure what the positives and negatives are about trying to connect the Sub via speaker terminals or RCA line level on the CXN. Or is it even advisable to use a cable that goes from the speaker terminals to the RCA line level inputs of the Sub?
Appreciate any help!
I have a Cambridge CXNv2 connected to a Schiit Aegir Power Amp through the line level RCA. Now, the CXN does have an additional balanced XLR out, but I can only connect the Schiit Aegir through RCA.
So these are my options and questions:
1. Connect the Power Amp to the Sub using a custom cable with speaker terminals on one end and RCA on the other end.
2. CXN XLR --> Power Amp RCA, and CXN RCA --> Sub RCA
3. CXN RCA --> Power Amp RCA, and CXN XLR --> Sub RCA
4. Return the Rhythmic and get an SVS SB1000 with high level speaker inputs.
In this case I’m not sure what the positives and negatives are about trying to connect the Sub via speaker terminals or RCA line level on the CXN. Or is it even advisable to use a cable that goes from the speaker terminals to the RCA line level inputs of the Sub?
Appreciate any help!
- ...
- 28 posts total
You can go line level using a y adapter on the Cambridge outputs. I use this product from my preamp to run my sub line level! https://www.audioadvisor.com/prodinfo.asp?number=AQM22FHRD |
@yogiboy The CXN has 2 outputs I can use, RCA and XLR, so adding a Y adapter to one seems to just add unnecessary connectors. @m-db Yes I know the Aegir XLR input is for mono, what I meant in option 2 is to use an XLR to RCA cable from the XLR output of the CXN into the RCA input of the Aegir. Then go straight RCA’s from CXN to the Sub. So either way you think it’s better to use the CXN outputs? |
@jtcf I just don’t see the reasoning in using a Y adapter if I could just use a straight cable from the source to the Sub. Is the adapter going to give me a better connection or signal in some way than a straight cable? I would still need to spend more because of the cost of the adapter and also an extra set of cables as well. And I figure it could potentially introduce more adapter related issues unnecessarily. |
- 28 posts total