Synergistic Red Fuse ...


I installed a SR RED Quantum fuse in my ARC REF-3 preamp a few days ago, replacing an older high end fuse. Uhh ... for a hundred bucks, this little baby is well worth the cost. There was an immediate improvement upon installation, but now that its broken in (yes, no kidding), its quite remarkable. A tightening of the focus, a more solid image, and most important of all for my tastes, a deeper appreciation for the organic sound of the instruments. Damn! ... cellos sound great! Much improved attack on pianos. More humanistic on vocals. Bowed bass goes down forever. Next move? .... I'm doing the entire system with these fuses. One at a time though just to gauge the improvement in each piece of equipment. The REF-75se comes next. I'll report the results as the progression takes place. Stay tuned ...

Any comments from anyone else who has tried these fuses?
128x128oregonpapa
For anyone interested, I made a new post on the SR power cords in the cable forum. All I can say at this point is ... WOW!
gbmcleod:

I did not make myself clear in discussing A/C wall outlets. Synergistic Research allows the most music thru of the outlets I have evaluated. The Furutech GTX-R gives a bigger soundstage. In my three systems I am using a total 14 Synergistic Research Teslaplex outlets and three Furutech GTX-r outlets.

I agree there is a much bigger improvement going from the SR-20 fuse  to Black than going to Red, and a bigger improvement going from RED to BLACK. Black is clearly a better sound than SR-20 or RED.

David Pritchard
Update on my experience.  The black has about 40 hours of burn in time in my Coincident Line stage.  A few minutes ago, I reversed the direction of the fuse.  Degradation of sound quality was immediately obvious, so I had the optimal direction to begin with.  I am going to wait a few more days and put the stock fuse back in to get a feel for how much burn in has helped.  Preliminarily, I would say this is a worthwhile and cost effective upgrade, but it falls somewhat short of transformative.  As a comparator,  I just replaced the stock feet on my ModWright Sony HAPZ1 with Edensound bear paws, a $160 upgrade, and enjoyed a much more significant improvement in sound. 
The ModWright Sony takes 2  3.15 amp slo blo's, which is also what I would need for my Coincident franks.  I will probably order a pair next week and try them in both the Sony and the Franks and evaluate the improvement.  It is likely either the Franks or the Sony will benefit.  If not, I will send them back and perhaps try the AM beeswax fuses. 

Hi Bill (Brownsfan),

Thanks for reporting your findings. My moment of truth occurred at the 60 hour point and Frank's(Oregonpapa) around 70 hours with the Black fuses. It will be interesting to see if additional hours make a difference in your case. As always you have to call it as you hear it. I appreciate your input.

Curious to see where you find the greater impact between your Sony digital  or the Frankenstein.

Charles,

^^^  What's surprising to me, Charles, is that with all of the terrific results garnered by most of us here with the SR Red and then the Black fuses, that there are the few who hear no positive results at all. I wonder what the cause of that could be? Are they system dependent ... working in most systems but not in all?