Teres, redpoint or galibier turntable

Sorry to thread jack but I'm also looking at a table in the 5k region and wasn't aware that Red Point had one that cheap.

TW Acustic Raven One? have you considered this?

My short list Basis 2500, Galibier Gavia with Serac platter, TW Acustic Raven One

I'm looking at using a Basis Vector 3/4 any comments on compatibility? I can't afford a Graham Phantom and I understand they use the same armboard

I think the characteristic of the Gavia that pleases me most is how it makes those few less than pristine LPs that I own sound worth listening to. The pops, ticks and crispies are still there but they are more in the background and don't get in the way of the music. I don't quite know what is contributing to this, but I like it a lot.

Cytocycle,

I'm familiar with the Raven only by reputation but I feel I can say that all three of the tables you mention are very solid performers.

An important consideration is how much do you need support from a dealer, other than first setup? If you feel you do have need of such support then Basis or TW may better fit your needs. However, if you're comfortable with 'table set up, are considering spending what a new 2500 costs, and want the best bang for the buck I'd recommend the Gavia with the Gavia platter. BTW, there is really nothing difficult about setting up a Gavia, or Basis for that matter.

I'm not sure what arm board on which table you're referring to? IME, the Graham arms and the Vector use completely different mounting schemes. The Graham's have a flange with a bolt pattern with a large hole in the middle for the tonearm connector to extend downward. The Vector uses a single hole about 1" in diameter to extend the stem of the base into and uses a horizontal set screw to hold VTA.

The multi arm tables mentioned above are great.But consider ultimate expense of two or three seperate arms versus VPI which has quick change of and arm tube for a different cartridge (I use LO MC and higher output MM mono).I know one guy who did both.He bought VPI but then made his own plug in basses that were attached to two arms which had carts matched up to two different stages.Nothing can beat ease of using multi arm but it's the more costly option so figure what you want and use that determinate.For me ultimately less spent on multiple arms meant better stage and Cartridges which IMHO can outweigh deck/arm combo as influencing the sound.
Cheers
Chazz

Dear Gcj123: These could be good options too:
http://cls.audiogon.com/cgi-bin/cls.pl?anlgtabl&1190323322

http://cls.audiogon.com/cgi-bin/cls.pl?anlgtabl&1190084247

Anyway, IMHO in any analog audio system with a decent TT ( like the Basis Signature 2200 ) the phonolinepreamp and a well matched tonearm/cartridge combination are the most important subjects for high quality performance.

Regards and enjoy the music.
Raul.

Hi: These ones could be very good alternatives too:

http://cls.audiogon.com/cgi-bin/cls.pl?anlgtabl&1190410575

http://cls.audiogon.com/cgi-bin/cls.pl?anlgtabl&1190410645

Regards and enjoy the music.
Raul.