The first watts

for the record I'm using Thiel CS 2.4's

11-21-14: Jmcgrogan2
Power works on a logarithmic scale, meaning that 100 wpc will sound twice as loud as 10 wpc (+3dB).

Whoops, that should read +10 dB. 10 times the power gives you twice the volume, or +10 dB. Sorry about that confusion.

So 10 watts is twice as loud as 1 watt. So your speakers, rated at 87 dB @ 1 watt, should be able to get up to 97 dB in an amp that switches over to Class AB at 10 wpc. Probably most of your listening would be in Class A, unless you are a headbanger.

So your speakers, rated at 87 dB @ 1 watt, should be able to get up to 97 dB in an amp that switches over to Class AB at 10 wpc. Probably most of your listening would be in Class A, unless you are a headbanger.

Sorry, that's not exactly right. The speakers are rated at 87dB/2.83V/m and since the speaker is 4 ohm, that will be 2 watts. Then there is a gain for 2 speakers, and a loss for listening distance greater than 1 meter. So a rough estimate for a distance of 2.5 meters using 10 watts would be ~92dB. Also, even if the average SPL is 75dB, some music can have dynamic peaks of 95dB and higher. If you really want to know, get a sound level meter, and measure the peak SPL when you listen.

If you use an iphone you can download an app with a fairly accurate spl meter. I find I rarely listen much over 70db in a small room. This was a surprise to me.

This makes me think your amp is operating mostly in class A.

I got the app. It seems my listening preference is between 75 and 85 dB. That's 8 to 9 feet away from the listening position to the center of the speakers. I'm not sure what that equates to in Watts