2. analog
  3. 1161099621

Thinking of modding my 834p, or should I move on?

I have an 834p deluxe and it needs a small repair. The cost of the repair isn't that much off of having some additional modifications performed, and once the board is desoldered, I was thinking...I may as well go whole hog! However, I am wondering if investing nearly 1k in modifications is really cost effective. I use a Koetsu Black and am thinking of moving up the Koetsu line and/or buying a Grado Statement Statement. I've read quite a few times that the 834p transformers are not that great. The Deluxe sells for around 900-1000 used, so for 2k I could perhaps buy the EAR 324 used or look at something else, unless at even 2k, the moddified 834p would be a solid investment. I like the sound, but I admit I don't have much experience with phono stages at all, and this is the only tubed one I have experience with.

Any input would be welcomed.
zanth
zanth OP
65 posts
 
Hi Paul,

Yes, I was quoted $200 to replace some RCA's (to NextGens though) and then another 800 for the mods (parts and labor). I have not yet done so because I was iffy on the price. I live in Canada so shipping to the US is always a PITA but if I could get it done much cheaper then I would.
clio09
3,355 posts
 
Tfkaudio - you can get a Lundahl step up transformer from K&K Audio. Kevin Carter will configure it and assemble it for you if you like. The process of swappping resistors is one that does not require soldering as Kevin provided pin holes on the PCB that you can easily pop resistors of your choice into. I'm very happy with mine.
pauly
1,012 posts
 
Hi Zanth

I guess labor needs to be paid for, but it does seem steep. I have never modded an EAR, but in my experience biggest improvement (by far) come when changing the coupling caps to better units. Looking at Skushino’s post, those are C1 and C7.

You may want to crack open the ear and have a look and see if you can replace them yourself. Practice soldering for a little on a wires/clips before to get yourself comfortable with the soldering iron, and then make the mod. Do one mod at a time (on both channels) and test after each mod. That way if anything goes awry, you know where.

The nice thing about going it yourself is that you can do it step by step and hear the effect of each mod. This will allow you to choose components that really suit your tastes. And the satisfaction of modding the gear yourself is almost as good as listening.

I like Mudorfs, but prefer V-Caps for coupling caps (when finances allow). Less expensive caps which also sound fantastic are Dynamicaps.

Resistors in the signal path I generally go for AN Tantulums.

Anyway, best of luck with the EAR. I believe they are very good once modded.

Regards
Paul
flemke
596 posts
 
After reading hundreds of posts about which caps,resistors,and tubes to use I have decided that there is no right or wrong way to mod. the 834p. You can tune it to you liking. I used Hovland couplng caps,Blackgate power caps,fast recovery diodes, and vishay metal film resitors.
I love the way it sounds in my system. This is a great way to get your feet wet with DIY.

Tim
gregm
3,405 posts
 
I can't but second all the modders' -- go ahead & pick up the soldering iron. Skushino & Pauly in particular give excellent directions. I strongly suggest you follow Thorsten Loesch. Do print out Loesch's instructions and follow them carefully. I have myself referred to Thorsten's proposed mods about a year ago in this forum but can't find the reference. I think I was linking to "Romy the cat's" ("goodsoundclub.com") but am not sure.

I suggest you keep the original step-up trannies though -- or replace with Lundahl (better). The S&B Skushino's using and the Bent unit is using are superior by far, of course, but extremely expensive. Buy some music with the extra savings:)
More to discover