Time to upgrade my turntable?


I'm thinking about getting a new turntable to replace my 4 year old Pro-ject Debut Carbon with an acrylic platter and 2M Blue cartridge (with about 600 hours on it). My budget right now is about $1000 but would consider spending a bit more for right turntable. Currently my system consists of a Sansui B-2101 2 amp (200 wpc) powering ADS L1290 speakers (the speakers will be upgraded shortly to ADS L1590's when I find and replace a couple drivers). I am using a Yamaha DSP A1 as the preamp (I like the DSP sound fields that imitate jazz clubs and concert halls). I do have the matching Sansui C-2101 preamp but it is not currently in line.  I also use a DBX 3BX DS impact restorer and expander/compressor. 

I listen to classical music and jazz.

What would you suggest? I might prefer to stay within the Pro-ject line as I could reuse the acrylic platter (if one is not provided with the recommended turntable). Perhaps the debut pro or X1?
128x128cspiegs
Your turntable and cartridge are excellent and a good match to the rest of your system, I don't think you will have any benefit upgrading the turntable, unless you have certain technical issues that affect the sound quality.  1K budget for a turntable will not give you any significant sound upgrade.
I'd also recommend keeping the TT & cartridge but getting a new phono section, maybe the Gold Note PH10 which is very flexible so when you change cartridges down the road it should allow for that. Just my 2 cents worth
You have a pretty good turntable considering the rest of your system.


My rule of thumb is always upgrade 2x or 3x the cost to get a significant improvement. Particularly the lower the initial cost. I would save up to make a bigger jump. This should put your TT in a level above the reat if your equipment. It will give you a noticeable improvement. Then save up to get a better preamp or speakers… this way you can raise the performance stepwise getting an incremental improvement each component, and long term upgrade the whole system to a new level.


This is the way most of us with really good systems got there. Sideways moves are disappointing and demotivating.
You will need to spend more than $1000 to get a significant improvement, more like $5000 for turntable, tonearm and cartridge. If you really want to spend your money just go for a new cartridge like a LVB 2M Black or an AT VM760SLH. 
What would you suggest? I might prefer to stay within the Pro-ject line as I could reuse the acrylic platter (if one is not provided with the recommended turntable).

No offense, but not the greatest reasoning. You've already got some good advice, in terms of baby steps are not the way to go. Your goal should be to save up for one that will be not a little but a whole lot better, and last you for years.    

Personally, I think the best approach from here on out is to consider table and arm separately. For several reasons. It is usually hard to save up. For whatever amount you can manage, it will get you a lot more quality spent on just the arm, or just the table, than a package.   

Also those who make arms to be sold separately, they really have to make a good arm because people are going to compare. That being the whole point. Whereas those like VPI making packages, pretty much nobody ever takes one of those arms off and that is how they get away with BS like their twisted wire side bias. Not to pick on VPI. Same goes for everyone else selling packages. I just like slamming the dumbest side bias in the business.  

Finally, buying them separately forces you to learn a whole lot more about the value of each part, how it works, and how it sounds. Vinyl isn't like digital. You don't just push a button. The sound quality you get is as much to do with your skill level as anything else. Skills cost no money, but pay off big time. Invaluable difference.  

But you deserve an answer for your $1k. The best one I know is it makes no sense to upgrade to a new component before extracting full performance from what you have. The more constrained the budget the more true this is. So put that table on some Townshend Pods, or a Platform, whichever you prefer and can make work. This will almost certainly be a greater improvement than the same money spent on a new table.   

If you want to go cheaper, and test the waters, get a set of Nobsound springs. Only $30. Then when you hear how good this works upgrade to Townshend and move the Nobsound down the chain to your amp or phono stage or whatever.  

The more experience you get with how music is supposed to sound the easier it will be to ditch that expander DSP stuff that is messing up all the good vibes coming off your vinyl. Selling those will free up funds for that new table and arm.