I have a Graham and the arm height is adjustable as it is on most arms; in most cases, not all, only one height board is offered. In all likelihood the same board will work but I have not used a Tri-Planar; is it also adjustable for height?
Tonearm mounting differences Graham vs.Tri-Planar.
I would appreciate for explaining mounting differences Graham vs. Tri-Planar.
Is the high is the same for both?
In other words if I can place them on the same arm board (plinth) and only mounting holes drilling pattern would be different, the high would be the same, not requiring any high adapters, transition panels?
Is the high is the same for both?
In other words if I can place them on the same arm board (plinth) and only mounting holes drilling pattern would be different, the high would be the same, not requiring any high adapters, transition panels?
- ...
- 8 posts total
Here is a picture from both Arms Graham Phantom / Triplanar Above the Armboard they are more or less the same, the main difference here is, the Triplanar is a "on Board" mount, the Graham Board needs a hole because the Arm shaft and the Din Connector is below it (you need some space). Graham Phantom |
Dougdeacon and Syntax, Thank you so much for your advice. Now is clear, I will keep the same arm board and re-drill it for the Tri-Planar. Now I need to find one somewhere. Dougdeacon, based on your previous post and experience, would you confirm that for ZYX Airy 3 cartridge the Tri-Planar would be one of the best options among others. |
- 8 posts total