unman M-900u for Focal Sopras 2 and 3

Quite.

It will destroy the Sopra so don’t worry. It can deliver at least 450watt at 3ohm and the Sopra need at max 400. In addition the luxman has the current to drive 2ohm with 600 watt and can jump to (1)ohm with 1200 watt.

It is made in JAPAN.

I've run an M900u on my TAD CR-1's and it gets them plenty loud (86 dB/2.83V/m).  Prior to that I was using the BHK 300 Mono's, and I have not felt volume constraint.  Now, they are not the best match for the TAD's, tonally (too light and zippy in combo), so I am back to using the BHK's (with the C900u preamp!). 

@jbrrp1
" I’ve run an M900u on my TAD CR-1’s and it gets them plenty loud (86 dB/2.83V/m). Prior to that I was using the BHK 300 Mono’s, and I have not felt volume constraint. Now, they are not the best match for the TAD’s, tonally (too light and zippy in combo), so I am back to using the BHK’s (with the C900u preamp!)."

I found a very similar thing with m-900 and Sopra No2 and also m-900 and Dynaudio Confidence 30; to my ears the results were threadbare-- yes ultra detailed but not engaging; Flat and more 2-d.
A Pass INT-250 fleshes out sound (have not tried this on the Focal Sopra) in a more engaging and dynamic way;
Last year I had an X250.8 with an ARC-LS27 and I find the INT-250 be a better value; amazing sound from one chassis.

You might want to experiment with the INT-250 on your TAD’s.