Who uses power conditioning?


I’m curious how many folks use some sort of power conditioning, or are you drawing the power from the wall “as is”? 
128x128zavato
Hello,

I have used a Tice power-block { larger old unit but works perfect } to feed my tube mono blocks, preamp, etc.   for many years.  Being an electrical engineer I can tell you that there is measurable noise on just about any AC line. 

If you want to save the money, you can go with a surge-suppressor AC outlet { amazon } or at least a decent power strip with one in it.

My system just didn’t sound right. My thiel 2.4’s didn’t go deep enough. The highs were “ hot”. I had a nice soundstage but no depth. I was plugged into the wall and a power strip.
i found a Richard gray rgpc 400 pro on agon.
Wow! Bass is now what i expected, deeper tighter than before ( I did put in a bass traps too). Hotness - gone. Soundstage now has a depth and the timbre of instruments is realistic. I think this may be the single best improvement i’ve made; certainly the mouse cost effective.

importantly I have a quality surge protection also . Those cheap strips cannot be trusted. Why trust many thousands of dollars to a single event cheap device. Makes no sense especially since a conditioner will improve your sound also. If I did it again, would buy the best you can afford. I’m saving for one of the PSAudio power conditioners.
The limited experience I've had with power conditioning led me to believe that going straight into the wall gave the best sound. Better dynamics, wider soundstage, etc.

On a lark and propelled by threads like this and the one on the Equi-Core I did some research and considered at least trying out the Shunyata Venom Defender. That was when I realized I had something like it already packed away.

All it took was a few minutes and I plugged my Blue Circle Thingee into a vacant spot on a Cullen Cable power strip (no filtering or surge capability) using a bog standard power cord.

Cue the lightbulb over my head, or the heavens parting. 

It seems that with both outlets on the same line and dedicated only to my audio and video demands, the Thingee did it's thing. BlueCircle sells smaller versions that don't have receptacles that just filter AC line noise and the Thingee has several times the amount of filtering.

Next, I swapped out the standard PC for a Zu Audio Mission PC and things got even better.

The noise floor, as well as the ceiling, side and back walls just dropped, blew up and blew out. I spent the last three hours going over familiar tunes only to discover new, or better tunes. A slight hash in the upper registers is gone (didn't know it was there). Everything has air aplenty with exacting space that naturally compliments positions instead of congealing them. The better the recording, the better the results.

The funny thing is that with the anything plugged into the Blue Circle the results weren't as good, but when used as a stand alone device, it excels. 

Now I'm wondering if something like the Venom Defender would be a better propositon than the Blue Circle Thingee, or if there's an even better one out there. As it stands now, this is a rather big improvement.

All the best,
Nonoise


Furman ELITE-15 DM I.  I don't really think of it as a conditioner but more as a non destruct surge protector.  About 4 months ago during a snow storm we took on an electrical event. Lights flashed and most of the house went offline.  Never had partial power before but that is what I had.

  Furman shut off and read "extreme voltage" state.  When the power came back i flipped on the Furman and we came back up.
Funny thing is the ceiling fan in the kitchen had been on the fritz for some time  and I had been considering a service call on it.  After the bump it works fine :)

I use Synergistic Research Powercell 12 UEF SE with SRX power cord from wall to PowerCell and then Galileo SX cords to all components. SR Active Ground Block with HD grounding cables for all cables and equipment. That’s a good start. Things really get good when you wind all these cables and connectors with fo.Q TA-32 tape brushed with Total Contact. Including and especially the grounding leads from all the cables. Most importantly treating the SRX grounding lead. OMG.