rauliruegas:
"Dear @noble100 : """ All DBA systems will provide accurate, detailed, smooth and natural bass that has an effortless quality to it. """
as can do it non DBA subs system. As you said maybe a different way " to see things " but DBA is not the only or best option. Clearly is for you and other gentlemans but exist other very good alternatives to it."
Hello rauliruegas,
Yes, it's definitely possible to attain very good bass response using 1 or 2 subs. As we've discussed previously, this is a bit of a compromise since the 1 or 2 subs need to be precisely positioned in the room to optimize the bass response perceived at a single dedicated listening position.
This specific sub positioning process for 1 or 2 subs restricts good bass response to the immediate vicinity of the dedicated listening seat and, by necessity, results in much poorer bass response at many other areas of the room. However, some individuals require good bass response at more than just a single listening position and a 4-sub DBA system is an excellent method to achieve good bass response not only at the dedicated listening seat but also throughout the entire room.
rauliruegas: "Normally the owners of planar type speakers are " against " to run the main speakers as a " satellite " one that is the " right " way to go ( for me. ) because that high-pass filter makes a paramount difference."
I completely agree with you that one of the major benefits of adding subs, and running the main speakers as satellites, is that it frees the main speakers and their amp from reproducing the bass frequencies which results in less speaker distortion and reduces the demands on the amp.
In my system, I've tried both configurations of running my planar panel mains full-range and with my mains as satellites with their low frequencies filtered out by the sub amp supplied with the Audio Kinesis Debra DBA system, This amp has a L/R high pass outputs for sending frequencies above the bass crossover setting to the main speakers amps.
I thought my system sounded best with the main speakers running full-range. The mid-range and treble range sounded very similar to me with both configurations but I did notice the bass range sounded more detailed and more dynamic with my mains running full-range.
I do have some thoughts about why I didn't discern improvements in the mid-range/treble range using the 'satellite method' as expected and as you have in your system. I'm uncertain of the quality level of the high pass filtering being done in the sub amp. But since I was unable to discern any differences in the midrange/treble response range between full-range and the satellite methods, I can only conclude that the filtering quality level is not an issue.
Also, any sonic gains expected from the reduction on bass frequency amplification demands on the main speakers amps may not have been realized since these mono-block amps are not lacking in power ( 1,200 w into the speakers 4 ohm load). Another possibility is the Magnepan 2.7QR main speakers I use as mains. These are 3-way planar panels that have rather large bass sections which provide very high quality bass on their own but that lack deep bass impact. Perhaps the improved bass response I noticed with running the mains full range is a result of the very high quality and articulate bass of my mains combined with the increased impact and dynamics provided by the AK Debra DBA system.
I think both our systems are just practical proof that there's several options available for achieving high quality bass response using subs.
Tim
"Dear @noble100 : """ All DBA systems will provide accurate, detailed, smooth and natural bass that has an effortless quality to it. """
as can do it non DBA subs system. As you said maybe a different way " to see things " but DBA is not the only or best option. Clearly is for you and other gentlemans but exist other very good alternatives to it."
Hello rauliruegas,
Yes, it's definitely possible to attain very good bass response using 1 or 2 subs. As we've discussed previously, this is a bit of a compromise since the 1 or 2 subs need to be precisely positioned in the room to optimize the bass response perceived at a single dedicated listening position.
This specific sub positioning process for 1 or 2 subs restricts good bass response to the immediate vicinity of the dedicated listening seat and, by necessity, results in much poorer bass response at many other areas of the room. However, some individuals require good bass response at more than just a single listening position and a 4-sub DBA system is an excellent method to achieve good bass response not only at the dedicated listening seat but also throughout the entire room.
rauliruegas: "Normally the owners of planar type speakers are " against " to run the main speakers as a " satellite " one that is the " right " way to go ( for me. ) because that high-pass filter makes a paramount difference."
I completely agree with you that one of the major benefits of adding subs, and running the main speakers as satellites, is that it frees the main speakers and their amp from reproducing the bass frequencies which results in less speaker distortion and reduces the demands on the amp.
In my system, I've tried both configurations of running my planar panel mains full-range and with my mains as satellites with their low frequencies filtered out by the sub amp supplied with the Audio Kinesis Debra DBA system, This amp has a L/R high pass outputs for sending frequencies above the bass crossover setting to the main speakers amps.
I thought my system sounded best with the main speakers running full-range. The mid-range and treble range sounded very similar to me with both configurations but I did notice the bass range sounded more detailed and more dynamic with my mains running full-range.
I do have some thoughts about why I didn't discern improvements in the mid-range/treble range using the 'satellite method' as expected and as you have in your system. I'm uncertain of the quality level of the high pass filtering being done in the sub amp. But since I was unable to discern any differences in the midrange/treble response range between full-range and the satellite methods, I can only conclude that the filtering quality level is not an issue.
Also, any sonic gains expected from the reduction on bass frequency amplification demands on the main speakers amps may not have been realized since these mono-block amps are not lacking in power ( 1,200 w into the speakers 4 ohm load). Another possibility is the Magnepan 2.7QR main speakers I use as mains. These are 3-way planar panels that have rather large bass sections which provide very high quality bass on their own but that lack deep bass impact. Perhaps the improved bass response I noticed with running the mains full range is a result of the very high quality and articulate bass of my mains combined with the increased impact and dynamics provided by the AK Debra DBA system.
I think both our systems are just practical proof that there's several options available for achieving high quality bass response using subs.
Tim