Worlds’ Best High End Loudspeaker Competition/Demo


Worlds’ Best High End Loudspeaker Competition/Demonstration?

Just got back from the Munich High End show, where I heard the most amazing demonstration. A comparison under identical conditions of the following loudspekers; Thiel CS 7.2, Sonus Faber Stradivari Homage, Audio Physic Kronos, Focal-JM Labs Grand Utopia Be, Wilson Audio Alexandria X-2 and TAD-1 (never heard of this one either, go to www.tadaudio.com for further information). This was a group demonstration in front of approximately 120 show attendees at a time, with an audience vote at the end of the final demonstration. I very much doubt anyone in the USA would dare do this type of demonstration at a HiFi show for fear of litigation! This is how it was done.

The demonstration was organized by Stereoplay, a German HiFi magazine. The room was approximately 8m x 30m x 3.5m (approximately 26 ft wide, 66 ft long, 11 ft high. The room had been specially acoustically treated with sound absorbers (sounded fine to me). Each set of speaker had been optimized for room placement before the demonstration (tape marks on the floor). Each set of speakers was auditioned in isolation; the other speakers were kept outside the demonstration room. All speakers were mounted on castors to facilitate moving in and out of the demonstration room (for practical purposes they were kept on the castors for the demonstration). Three pieces of music was played on each set of speakers; a SACD, LP and regular CD. I do not know the names of the pieces (I don’t speak German, so I couldn’t understand what was being said at the demonstration introduction). However, the SACD was Jazz, CD classical and the CD Latin. All recording were of demonstration caliber and full range recording. I believe sound levels had been previously set to enable each set of loudspeakers to play at exactly the same level. Equipment included a Viola Cadenza pre-amp, Pass XA160 power amp, Accuphase DP-85 CD/SACD player, Laufwerk TT (German, high end). All hooked together with some very impressive looking power cables, interconnects and speaker cable (read, very expensive looking). In summary, IMHO, the speakers were being demonstrated under the best conditions possible, albeit with approximately 120 people in a very large room. The overall demonstration took approximately 1 hour. Time between demonstrations was kept relatively short due to some fancy loudspeaker movement and team work.

How did they sound? Fantastic, every single loudspeaker! Mind you, at this price, so they should! I don’t have the ability to describe how each speaker sounded, remember this is a comparative demonstration.

And the winner is? Based on a show of hands after the final demonstration (the demonstration was done in the same order I listed the speakers), the Wilson Audio Alexandria X-2 was a clear winner. I think they are the most expensive speakers demonstrated. I personally found the TAD-1s were also excellent.
mgattmch
I also attended the session twice. The first time I was sitting not in an optimal position. The second time I was sitting in the sweet spot - every speaker was positioned by technicians of this producer! The Wilson technician was 5 hours in the listening room to find the ideal position! So the second time there are no excuses to what I heard. All speakers were around 2 - 3 meters away from the back wall. The Alexandria was positioned around 0,5 - 1 meter away from the back wall. In both hearing sessions there was no absolute winner found by the votings of the audience. This is very astonishing for me, especially if you take the prices of the speakers into account. I was disappointed about the Wilson - not only if one see the price. The most profound sound especially in the bass fundament showed the JMLab, but it lacked a little bit of dynamic and precision. For me the new TAD was the outstanding speaker of this comparism. This speaker is nearly perfect. I never before heard a speaker with such a brillant, dynamic and transparent sound. I only can recommend everyone to arrange a listening session with the TAD. I also think, that tweeter materials like Beryllium and Diamond are very important for an absolute high end performance. Examples like the diamond tweeter of the Avalon Eidolon, the Lumen White White light or the Beryllium tweeters of the JMLab and the TAD show the direction. Bravo, TAD!
I agree with Wulf comment on the TAD-1. Almost as good as the Wilson’s, but at 1/3 the price! I would like to have heard more of this loudspeaker.
here is a link for the demo..

http://www.shows.soundstagelive.com/shows/avtour2004/frk_standout_audio_stereoplay.shtml
Given the reported conclusion of this comparative demo, I surfed the web to see what these Wilson Audio Alexandria X-2 look like and ..... come on, they look like the blockhaus bunkers which have been built on the French coasts by the German during the Second World War. Regardless of the money you have to pay for it, who would want to have THAT in their room, even in the garage? Why do we have to put up with at best uninventive, at worst downright ugly designs when it comes to speakers? Which car manufacturer would follow that sort of strategy? At least some have understood that music reproduction should be a holistic art audio yes, but visual too! Thank you Sonus Faber
The demo link is useless, since there are no comments about sound, difference, etc, just a few nice shots... Bah.