Home Wiring?


The only weakness in my currently killer system is in the power section. Right now I'm still running it off my main house box with all the components on the same line out of the same outlet. I know - not a good idea. So I'm here to ask about how I should go about putting in a dedicated line. What do I need? What audiophile level parts should I get? Do I need an electrician? Can I put in another box? Does anything I get have to run off the incoming power from the power company?

I really have no clue about this stuff. I was looking over at Audioexcellence for outlets (the Oyaides look nice) and Acrolink in-wall wires. Any other suggestions?

Thanks.
no1willfan
Thanks for your reply. I will definitely check around to see what my options are. If I can get another line/box installed I think that would be the best route. If I can't then I'll have to assess and go from there.
I am finishing up my listening room and just had the electrical aspects run. Depending on your system quality level should determine the approach. If it is an all out assault then I recommend the Isoclean separate panel and the grounding rod from.....shoot, not sure off the top of my head. If you want to know I can easily find it. I just moved my system into that room last night for the first time even though the room is not finished. Without breakin it is one of the biggest improvements to the system with the aspects that I was trying to achieve.

I also am comparing romex cable to the Analysis Plus electrical wire to see if wiring makes that much of a difference.

Regards!
Further update on the Analysis Plus (AP) power cable vs Romex 10/2 wire....the AP Power Oval 10 Cable is hands downs far superior, from my perspective and for what I am trying to achive, to Romex. Of course, the AP cable is $1500.00 for 50 ft (retail based on their web site) which puts it in that categories of:

1) it certainly better be a significant improvement or chaulk it up me just being pegged as another sucker born every minute or me having wishful thoughts that it must be better because it is more expensive
2) you do not even tell your closest audiophile friends until you have tested it because there will again be another smirk from the guys. :)

Everything electrical is brand new and nothing is broken in yet. I have 1 dedicated line with AP cable and another dedicated line with Romex 10/2 coming from the Isoclean panel. Both outlets are the Porterports at this point. I ran three type of test several times over and over. The tests were:

1) Both the amp (Audio Note UK Ongaku) and the source (Meitner DCC2 and CDSD (original version)) hooked up to the outlet with AP wire.
2) Amp hooked up to outlet with AP wire and source hooked up to outlet with Romex
3) Amp hooked up to outlet with Romex and source hooked up to outlet with AP wire

I played one track over and over again using the various scenarios above. The music had a bunch of things going on including (1) a person talking on a portion of the song (2) multiple people singing (3) various types of percussion and string instuments.

In summary, the basic fundamental differences between the two electrical cables are:

1) There is way more air coming from the individual instruments and voices on the AP wired outlet. This provides a more natural presentation and makes the voice sound more like someone is in the room instead of listening to a recording.

a) After a few test I could not stand listening to the amp on Romex once I heard it on AP. I tried switching back and forth 3 times and did not like the dry sound (relatively speaking).

b) The more electronics hooked up to AP the more air. With the amp on AP and the source on Romex it gave the appearance of more detail but it was only from the lack of air and not really more detail. Again, it made it sound artifical comparatively speaking.

2) It provides a dimensional aspect providing a more holographic image when using the AP wired outlet. When the person spoke on the track you could tell that this guy is about 300-400 pounds, which he is, and the instruments just seemed like you were hearing the whole instrument.

a) Again, the more electronics hooked up to the outlet with AP cable to more you got.

3) It music was bigger in scale with the AP wire. not sure if it was from more air being around the instruments or what. But this was nice, at least in my system, since I am running a low powered amp on a relatively non efficient speaker. Although I am running the Speltz Autoformer in my system, the impact of scale was impacted more by the AP wired outlet.

4) There was a more ease of presentation. This is somthing that I really like in a presentation. It still is probably not to the degree of the next model up in the speaker line. But certain music was presented with a natural delivery that I thought made it more life-like. I think all of the aspects above contributed to this. Obviously, CDs are CDs and most of it is too compressed to ever give you that sense. But the ones that are good sounded really great being combined with the AP wired outlet.

After conducting this with one track I tried several other types of music with limited scenarios. Mainly the scenarios that I thought would be the selected preference going forward. Based on hearing those tracks I think there are additional tweaks that I am going to try to see what happens.

Anyway, since this thread is on home wiring I just wanted to present some information about what I heard in my system, my environment, and of course my listening acuity. I am in no way affiliated with these products and just enjoy trying different things out. Since there has not been too many test of this nature, I think, and my room is at that stage where wiring and rewiring is not a problem I thought it would be good to test this and be able to share the information. It certainly was an ear opening (couldn't resist) experience and would certainly like to hear from others that maybe have tested other wires.

Regards,
Stenersr, thanks for the detailed summary of your listening experience with the AP wiring. This is very interesting and intriguing.
.
I listened to more music today and want to share another aspect. BTW, I have not made any additional tweaks yet so it is the same setup as yesterday.

I played some solo piano pieces only and I almost did not like having all components plugged into just the AP wired outlet. I thought it was a little too exaggerated regarding decay and air. With too much of these aspects it sounded like a little too much reverb was added or you were in a room that echoes. When I switched the CDSD only over to the Romex wired outlet but left the DCC2 on AP wired outlet it improved. The higher octaves had more detail and less residual artifacts which seemed more natural.

I still have not moved any of my sources onto vibration control pieces so I am not sure if this would provide a similar benefit. Also, I do not know how long break-in is on this wire so not sure what the final sound will be like. But for right now I am leaning towards having at least two different types of wired outlets. I guess it is no different than having other different cables (PC, interconnect, or speaker). That way you can control the amount of certain characteristics.

Regards,