Home Wiring?

Further update on the Analysis Plus (AP) power cable vs Romex 10/2 wire....the AP Power Oval 10 Cable is hands downs far superior, from my perspective and for what I am trying to achive, to Romex. Of course, the AP cable is $1500.00 for 50 ft (retail based on their web site) which puts it in that categories of:

1) it certainly better be a significant improvement or chaulk it up me just being pegged as another sucker born every minute or me having wishful thoughts that it must be better because it is more expensive
2) you do not even tell your closest audiophile friends until you have tested it because there will again be another smirk from the guys. :)

Everything electrical is brand new and nothing is broken in yet. I have 1 dedicated line with AP cable and another dedicated line with Romex 10/2 coming from the Isoclean panel. Both outlets are the Porterports at this point. I ran three type of test several times over and over. The tests were:

1) Both the amp (Audio Note UK Ongaku) and the source (Meitner DCC2 and CDSD (original version)) hooked up to the outlet with AP wire.
2) Amp hooked up to outlet with AP wire and source hooked up to outlet with Romex
3) Amp hooked up to outlet with Romex and source hooked up to outlet with AP wire

I played one track over and over again using the various scenarios above. The music had a bunch of things going on including (1) a person talking on a portion of the song (2) multiple people singing (3) various types of percussion and string instuments.

In summary, the basic fundamental differences between the two electrical cables are:

1) There is way more air coming from the individual instruments and voices on the AP wired outlet. This provides a more natural presentation and makes the voice sound more like someone is in the room instead of listening to a recording.

a) After a few test I could not stand listening to the amp on Romex once I heard it on AP. I tried switching back and forth 3 times and did not like the dry sound (relatively speaking).

b) The more electronics hooked up to AP the more air. With the amp on AP and the source on Romex it gave the appearance of more detail but it was only from the lack of air and not really more detail. Again, it made it sound artifical comparatively speaking.

2) It provides a dimensional aspect providing a more holographic image when using the AP wired outlet. When the person spoke on the track you could tell that this guy is about 300-400 pounds, which he is, and the instruments just seemed like you were hearing the whole instrument.

a) Again, the more electronics hooked up to the outlet with AP cable to more you got.

3) It music was bigger in scale with the AP wire. not sure if it was from more air being around the instruments or what. But this was nice, at least in my system, since I am running a low powered amp on a relatively non efficient speaker. Although I am running the Speltz Autoformer in my system, the impact of scale was impacted more by the AP wired outlet.

4) There was a more ease of presentation. This is somthing that I really like in a presentation. It still is probably not to the degree of the next model up in the speaker line. But certain music was presented with a natural delivery that I thought made it more life-like. I think all of the aspects above contributed to this. Obviously, CDs are CDs and most of it is too compressed to ever give you that sense. But the ones that are good sounded really great being combined with the AP wired outlet.

After conducting this with one track I tried several other types of music with limited scenarios. Mainly the scenarios that I thought would be the selected preference going forward. Based on hearing those tracks I think there are additional tweaks that I am going to try to see what happens.

Anyway, since this thread is on home wiring I just wanted to present some information about what I heard in my system, my environment, and of course my listening acuity. I am in no way affiliated with these products and just enjoy trying different things out. Since there has not been too many test of this nature, I think, and my room is at that stage where wiring and rewiring is not a problem I thought it would be good to test this and be able to share the information. It certainly was an ear opening (couldn't resist) experience and would certainly like to hear from others that maybe have tested other wires.

Regards,

Stenersr, thanks for the detailed summary of your listening experience with the AP wiring. This is very interesting and intriguing.
.

I listened to more music today and want to share another aspect. BTW, I have not made any additional tweaks yet so it is the same setup as yesterday.

I played some solo piano pieces only and I almost did not like having all components plugged into just the AP wired outlet. I thought it was a little too exaggerated regarding decay and air. With too much of these aspects it sounded like a little too much reverb was added or you were in a room that echoes. When I switched the CDSD only over to the Romex wired outlet but left the DCC2 on AP wired outlet it improved. The higher octaves had more detail and less residual artifacts which seemed more natural.

I still have not moved any of my sources onto vibration control pieces so I am not sure if this would provide a similar benefit. Also, I do not know how long break-in is on this wire so not sure what the final sound will be like. But for right now I am leaning towards having at least two different types of wired outlets. I guess it is no different than having other different cables (PC, interconnect, or speaker). That way you can control the amount of certain characteristics.

Regards,

@Stenersr:

A sincere thanks for the report. This actually helps out a lot. I have my entire system on vibration control, and it definitely makes a discernible difference, especially in terms of reproducing transients accurately, increasing speed and PRAT, tightening up images and producing them with more weight and 3-dimensionality and delivering better dynamics - and this is on my headphone system, so I imagine it'd be even more dramatic on a speaker system.

I wonder what the difference between the AP, Acrolink, and JPS Labs cables are? It appears the AP is just a bit cheaper than the Acrolink at $30 compared to $33 a foot.

I looked up Isoclean as well and it appears that might be a really helpful site in terms of figuring out what I need to set up a high-quality dedicated line. What, specifically, do you recommend from them?

BTW, my system is:

-Harmonix Reimyo CDP-777 w/Upgrade Company mod
-Single Power SDS-XLR Custom headphone amplifer
-Sony MDR-R10 headphones
-Ultrasone Edition 9 headphones
-Virtual Dynamics Genesis IC
-Virtual Dynamics Master PCs
-Grand Prix Monaco Modular Isolation Rack

No1willfan, Thanks for the info on other electrical wires I will defintely look into it. It will have to wait until after next Tuesday as I am leaving for London this evening.

I, or another local audiophile, have tried most of the Isoclean products. I also have installed the Isoclean panel and a special grounding rod outside the house. The panel is very special but the whole solution is very expensive. I also have their top of the line power cable which I like. The other Isoclean solutions can also get expensive but soemtimes with mixed results. So it depends on what is trying to be achieved. If you want more specifics you can email me. I am bringing my laptop but may or may not get to it until I return. Regards,