APS Pure Power A/C Regenerators


Over the years I have tried a few power conditioners and always felt that they stripped the music of its "body," leaving me with a non-involving, non-musical, thin sound.

Because of this, I have only gone as far as a dedicated panel to dedicated circuits, with some above standard electrical hardware. ...and have been pleased with this results.

I recently had a conversation with a fellow audiophile, who also happens to be an engineer, who recommended that I look into the Pure Power line of A/C Regenerators.

He has tried quite a number of tweaks to his electrical supply over the years and could not say enough great things about Pure Power, to the point that he strongly felt that using this (specifically referring to the model 2000) in any standard outlet in the home, would outperform the improvments of dedicated circuits or any other electrical tweaking.

I am considering a project in my home that would move my listening room to a new space. Before I do this and before I bring in an electrician for all of the custom works, I am looking to hear from any folks that own or have owned a Pure Power regenerator.

Please share your experiences, both good or bad. Also, please comment on other A/C conditioners or custom/dedicated circuit topologies that you have compared this to.

Any experiences that you can share regarding APS Pure Power regenerators is appreciated.

Lastly, does anyone know if there is a performance difference between the different models, or do they only differ by their output capacities?

Thanks!
barrelchief
I was playing with the PurePower 2000 for the past three weeks, and ended up buying one. In fact I knew after the first 10s I switched the unit on it is a keeper - the change was THAT obvious.

I was never really a fan of power conditioning - from all the units I tried, none was really transparent to the signal. Some muted microdynamics, some made my system sound lean (PS Audio Power Plant P-300). For the last 5 years I run all my gear straight from my dedicated AC outlets.

The PP is the first one that seems to have no downside. At least sonic wise, 'cos the fan noise can be really annoying. However, I have replaced the stock fans with Noctua ultra quiet (7dB) ones, which solved the problem eventually.

Great stuff.
I'm buying a 1050 next week. I am in a situation where no dedicated lines are possible and I see this as the best solution after examining combinations of filters and isolation transformers.
Does the 2000 do a better job at regenerating a waveform? I hear the fan in the 1050 is quieter.