Tweaks

I did apply just a tiny tiny amount, I never touched the tubes before being afraid of blowing up my system, but after reading the instructions I gave it a shot and loved the end result, as for now... I hope nothing bad happens in the future, I will update if there is an issue.

4est- Regardless of how long your tube dealer has been around(I've been in the electronics business,in one capacity or another, since 1975- SORRY about your erroneous assumption), the product in question hasn't been around NEARLY that long. NO, NOT 4-500 Volts. The connectors I was referring to are IC pins/sockets and data type ribbon connections. ie: My TacT RCS 2.2aaa is FULL of them, and they've all been treated(5.10v, btw). These types of connections also occur in electronic musical instruments, and automotive/motorcyle components, the function of which I have also found to benefit from these products. REMOVAL? There are NUMEROUS sprays that can be used to completely remove these conductive, silver bearing pastes and which leave NO RESIDUE, AT ALL(ie: http://www.aerochemisb-cheongfy.com/2010/06/loctite-contact-parts-cleaner-25791.html)! I've been cleaning/flushing crap(including the conductive varieties) out of electronic gear(of ALL types) for almost four decades, without incident. AGAIN, the rule: ATTENTION TO DETAIL! If you are afraid- DON'T use the stuff(simple)! I was answering the thread originator's question, based on experience with my own, and numerous others', equipment. What's the ratio of those that have used these products and botched it, to those that have used them successfully? You tell me! But- I'm certain those that have failed, have made the MOST NOISE!

Rodman:

As I suggested, try Stabilant 22. It IS the stuff to use for ICs, you do not even need to remove them. It is the active ingredient in what used to be called "Tweak". I am sure you remember that stuff. FWIW, I realize that it can be done and is of benefit in all connections, just problematic...

My assumption was not erroneous, I have an EE background myself. I was talking about shear experience. He has been selling tubes to people for 25 years and has heard it all over that period of time is all I meant. It was not intended as a put down.

4est- I personally prefer the Caig products for cleaning accessable contact points of all kinds, after having tried a plethora over the years. As far as experience; I was building and experimenting with electronics as a hobby, from the age of 13(1961), degreed at Case Institute, and finally got into the vocation in 1975(TV/audio/pro reinforcment/instrument/speaker system- repair & modding). Opened my High End Audio shoppe in Florida, in 1978. Lots of experience with, and exposure to, tubes(etc). I've heard a few stories myself, but am a firm believer in verifying things, before writing them off(knowing how much abilities vary among our species). Happy listening!

My gear still sounds great, no problems with the silver treatment leaking or causing damage. It's been in use for months now, I'm glad I got around to putting this stuff on the tube pins.