What is “warmth” and how do you get it?


Many audiophiles set out to assemble a system that sounds “warm.” I have heard several systems that could be described that way. Some of them sounded wonderful. Others, less so. That got me wondering: What is this thing called “warmth”?

It seems to me that the term “warm” can refer to a surprising number of different system characteristics. Here are a few:

1. Harmonic content, esp. added low order harmonics
2. Frequency response, esp. elevated lower midrange/upper bass
3. Transient response, esp. underdamped (high Q) drivers for midrange or LF
4. Cabinet resonance, esp. some materials and shapes
5. Room resonance, esp. some materials and dimensions

IME, any of these characteristics (and others I haven’t included) can result in a system that might be described as “warm.”

Personally, I have not set out to assemble a system that sounds warm, but I can see the appeal in it. As my system changes over time, I sometimes consider experimenting more with various kinds of “warmth.” With that in mind…

Do you think some kinds of warmth are better than others?

Thanks for your thoughts.

Bryon
bryoncunningham
Just a personal experience. I was at a high end salon sitting in a chair while they were setting up a system. They substituted various components and I could tell the difference as they did. The $2k cd player (Arcam) sounded fine but replacing it with a $3500(Linn) added a 3rd dimension to the soundstage. The speakers were the ones with the Be tweeter. The preamp was a tubed Audio Note 1 ($1k). Then they substituted a Linn ($1500) solid state preamp. The sound became shrill and I was pretty much driven out of the store. It wasn't even close. So warmth to me was tubes that made me want to listen indefinitely. I think they did that on purpose when they figured out I wasn't buying that evening. :)
Hi Bryon - for me, assembling a system that sounds "real" is automatically also going to be a system that sounds "warm." I suspect this is true for the great majority of audiophiles out there, especially those whose reference is live, unamplified acoustic music in a good performing venue (I am assuming, for instance, that this is what HIfiman means by "acoustically neutral," but I could be wrong). A good performing venue is "warm." I have never heard a system I would describe as "cold" or "harsh" that I could also describe as "real." Hifiman also speaks of the "inherent warmth of real instruments", which is certainly true, and I would also add the human voice to that. Though an actor may make his voice sound as cold as possible, there are extremely few instances where a singer would do so. Even HIP groups that don't use vibrato still have a natural warmth to their string tone. I really don't care how well a high-end system may measure, if it doesn't sound real/warm, and IMO/E, way too much high end equipment falls short. As for technical reasons why, I am certainly nowhere near as qualified as many others on this board to answer that; but this does put me in mind of something I read I think last night in a different thread where Atmasphere said, and I am probably badly paraphrasing here, that designers often have a choice between making equipment that measures well, and equipment that obeys the rules of human hearing. Perhaps he will weigh in on this thread.

Incidentally, part of the above is another instance of confusion that results from the use of the term "neutral." :)
I agree with Hifiman. Your system has to have enough 'warmth' inorder to portray music naturally and realistically. I think it's a matter of degrees: too little warmth and the result will be overly sterile and analytical, too much warmth and you get a syrupy sound (which I define as slow with an emphasis in the upper bass/lower midrange). I think of it as a continuum:

analytical___________________________syrupywarm

The trick is to first determine generally where on this continuum your taste lies and then,secondly, to assemble your system components to match your tastes. Easier said then done, for sure. I would say most A'gon members' tastes lie between somewhere, where the warmth is, with very few at the extremes.
Looking back on my system evolution, I clearly moved from an original analytical system to a current system that is much warmer without consciously thinking in these terms. But I can remember that I was looking for more realism and that illusion of 'you are there'. I know now that I was wanting more 'warmth',depth and presemce.
But your question was about how do you get more warmth. There was another recent thread about 'bloom' that you may want to read. I think the 2 concepts are closely related. In my limited experience, I would suggest tubed equipment needs to exist somewhere in your audio chain (source, preamp,amp) to obtain good, natural warmth and bloom. I don't deny you can achieve some warmth and bloom with solid state equipment but you'll need to select carefully and have deep pockets to be successful. Speaking of which, your system is very nice and I don't see any obvious cause of a lack of warmth. I don't think your Focal spkrs or Pass amp are responsible. I am definitely no expert but that won't stop me from making one suggestion: experiment. You could try out a few tubed preamps to see if this gives you the desired warmth(hopefully, there are some local dealers that will accomodate this). This worked for me. I'm not familiar with your preamp/processor or the mods but know you've made a big investment in it. But even if you substituted a different preamp, you could still utilize your current preamp as a prossessor if the new preamp has a HT passthru. Not sure if I helped but wish you good luck on your search.

According to Technical Director of Benchmark John Siau, DAC1 that I own, was specifically designed not to sound warm but rather natural without enhancement of any harmonics odd or even. Enhancing even harmonics does sound really nice with guitar or voice but not so with instruments that poses a little more complex than regular overtones harmonic structure. Piano is such instrument (as well as percussion instruments) and when it is reproduced on very warm equipment it sounds almost like out of tune.

On the other hand SS gear often designed to sound hi-fiish or for good spects on paper enhances (because of transient intermodulation introduced by deep negative feedback) odd harmonics. Our ears are very sensitive to odd harmonics since loudness cues reside there (like 7th or 9th harmonic).

Neutral sound (whatever it is) is the best but I understand that staying a little on warm side protects from brightly recorded material. Fortunately my Hyperion speakers sound slightly warm with zero sibilants on any CD - and it is in combination with Benchmark DAC1 and unforgiving class D amp.
My older speaker had aluminum dome tweeter and was unbearably bright in the same setup.