Pre-Amp Power Supply Upgrade ????


What benefits will increasing the storage capacitance of a Pre-Amp's power supply do? Is 50,000 microfarads of storage capacitance plenty?
dnlyko
Dnlyko- Increasing the storage capacitance can have a very positive effect. However, quality is of more importance than quantity once you've reached a design minimum of storage. Also, simply increasing the quantity without considering the rest of the power supply circuit and physical layout, may yield no benefits, or worse, damage the rectifier from overcurrent at turn-on.

Also, the greater gains will likely come from improved caps after the regulators which are closer to the audio circuits. The main a/c filter bank is important, but doubling, tripling, or quadrupling the size of the main bank alone may not bring about the improvements you desire. The power supply needs to be examined as a whole.

I'm not trying to impede your interest in DIY projects. In fact, I wish more enthusiasts would consider 'getting into' their components. But look into some of the more DIY websites and pick up a good source book on power supply design. They usually offer a relatively simple explanation to understanding the basics as well as getting into the math behind the scenes, and may help you avoid a 'magic smoke' experience. Follow your curiousity and interest. Enjoy the electronics that best serve the music.
Talk to Bill Thallman at Music Technology
http://www.musictechnology.com/
bill@musictechnology.com

Bill if a former Conrad Johnson engineer and knows preamps. He also
does power supply upgrades. He upgraded the power supply on my
CJ/Motif preamp with good results.
I'm with Scott on this one. There are some old amps that would produce 200+ wpc @ 8 ohms with less than 10,000 uF's of capacitance in them. As such, 50,000 uF's is more than enough for any preamp.

Keep in mind that if you turn this preamp off and on as you use it, those caps have to "fill" or "charge". This is a LOT of "in-rush current" for the power supply components to deal with, so adding more could actually increase the wear and tear on the equipment. If you leave this unit turned on all of the time, it is not a big deal other than for the initial turn on and the occasional power down / up when doing maintenance. Sean
>
Other than a higher price and a more crowded layout, what does that exhorbitant amount of capacitance buy you in a preamp though ? Sean
>