Capacitor log Mundorf Silver in Oil


I wished I could find a log with information on caps. I have found many saying tremendous improvement etc. but not a detailed account of what the changes have been. I have had the same speakers for many years so am very familiar with them. (25+ years) The speakers are a set of Klipsch Lascala's. They have Alnico magnets in the mids and ceramic woofers and tweeters. The front end is Linn LP12 and Linn pre amp and amp. The speaker wire is 12 gauge and new wire.

I LOVE these speakers around 1 year ago they started to sound like garbage. As many have said they are VERY sensitive to the components before them. They are also showing what I think is the effect of worn out caps.

There are many out here on these boards I know of that are using the Klipsch (heritage) with cheaper Japanese electronics because the speakers are cheap! (for what they can do) One thing I would recommend is give these speakers the best quality musical sources you can afford. There is a LOT to get out of these speakers. My other speakers are Linn speakers at around 4k new with Linn tri-wire (I think about 1k for that) and the Klipsch DESTROY them in my mind. If you like "live feel" there is nothing like them. In fact it shocks me how little speakers have improved in 30 years (or 60 years in the Khorns instance)

In fact I question Linn's theory (that they have proved many times) that the source is the most important in the Hi-Fi chain. Linn's theory is top notch source with lessor rest of gear including speakers trumps expensive speakers with lessor source. I think is right if all things are equal but Klipsch heritage are NOT equal! They make a sound and feel that most either LOVE or hate. (I am in the LOVE camp and other speakers are boring to me)

So here goes and I hope this helps guys looking at caps in the future. Keep in mind Klipsch (heritage Khorns Belle's and Lascala's especially) are likely to show the effects of crossover changes more then most.

1 The caps are 30 years old and
2 the speakers being horn driven make changes 10x times more apparent.

Someone once told me find speakers and components you like THEN start to tweak if needed. Don't tweak something you not in love with. Makes sense to me.

So sound
Record is Let it Be (Beatles)
The voices are hard almost sounds like a worn out stylus.
Treble is very hard. I Me Mine has hard sounding guitars. Symbals sound awful. Everything has a digital vs. analog comparison x50! Paul's voice not as bad as John's and George's. Voices will crack.

different lp
Trumpets sound awful. Tambourine terrible. Bass is not great seems shy (compared to normal) but the bad caps draw soooooo much attention to the broken up mid range and hard highs that are not bright if anything it seems the highs are not working up to snuff. I have went many times to speaker to make sure tweeters are even working.

All in all they sound like crap except these Klipsch have such fantastic dynamics that even when not right they are exciting!

Makes me wonder about the people who do not like them if they are hearing worn out caps and cheap electronics? Then I can see why they do not like them! If I did not know better from 25+ years of ownership that would make sense.

For the new crossover I have chosen Mundorf Silver in Oil from what I have read and can afford. I want a warm not overly detailed sound as Klipsch already has lots of detail and does not need to be "livened up" they need lush smooth sounding caps. Hope I have made the right choice?

When the crossover is in I will do a initial impression on same lp's. Right now it goes from really bad (on what may be worn vinyl) to not as bad but NOT great on great vinyl. (I know the quality of the vinyl because tested on other speakers Linn)

The new caps are Mundorf Silver in Oil and new copper foil inductors are coming. I will at the same time be rewiring the speakers to 12 guage from the lamp cord that PWK put in. PWK was a master at getting very good sound often with crap by today's standards components.

The choice of speakers would be a toss up now depending on what I am listening to. Klipsch vastly more dynamic but if the breaking up of the sound becomes to much to effect enjoyment the Linn would be a better choice on that Lp. If I could I would switch a button back and forth between speakers depending on song and how bad the break-up sound was bothering me.

volleyguy
Changed my first power supply cap.

Not the improvement hoped for. So far it sounds bright to me. I am hoping for break in improvement.
I am going to start clocking in the hours for break in on the Jensen Electrolytic in power supply.

I have some ASC poly caps here to compare in the same amp in the power supply. This will take some time for the Jensen electrolytic caps to break in. Then for the ASC's as well. (some modifications to make work) I even have a Mundorf Silver in Oil still around that could be put in as bypass. From Tempo's site the ASC is ranked higher anyway?

Right out of the box aggressive and have a bright glare on the Jensen. (I hope for big improvement with break in)

I took out the amp yesterday as I wanted to listen to some music and the Duelund/Jensen coupling cap'ed amp stares at me.

Once again it is not as easy as one would think (or at least me) to replace old parts and get some big improvement (at least out of the box) as long as the old parts were working correctly.
You certainly don't do things quick and easy. :)

Some day, you might end up doing more cap rolling, than we've done.
Of course you can always convert the amp to a parafeed-type configuation with a CCS or choke on the plate instead of a resistor and eliminate the PS caps from the signal path completely. That's what I did with my preamp and the results were astonishing. Horizontal load lines are a wonderful thing.

Might be more mods than you are willing to do, however.
Duelund

Yes I might be crazy. Like I have mentioned before how did some old tube amp pulverize my new SS amp at the start of this thread started my brain thinking and testing wanting to know why?????

One of the things that shocked me the most was the old amp was "dead" quiet. I have 104db efficient speakers and the noise reduction was just astonishing compared to the new SS amp.

I am starting to wonder now about new electrolytics. My formerly "dead" quiet amp EL84 has no idle hum (and did not before) at all with the Jensen electrolytic but a white noise at a level vastly higher than the vintage electrolytic cap. I can hardly keep myself from yanking it out!

Are the new electrolytics packed tighter to make them so much smaller? The old one I took apart a lot of goo (electrolytic) with the paper kind of a gooey dead mass. Are the new electrolytics too focused on size??? (being small) Is the reason the ASC caps are thought so good (power supply) they have liquid around the cap. Is this causing a dampening? I expect so.

On the coupling caps the vintage Vishay's are all dipped in some resin. The Ampohms are not. Is that why the Ampohms are noiser? Is this dampening the resonance?