2. amps-preamps
  3. 1026753096

Bi Amping... worth it?

I'm not really sure how much of a difference bi amping would make in my system:

--Aerius i (there are two sets of speaker posts on the back... )
--VTL IT 85

the review in stereophile said that biamping really opened up the sound. But I don't really listen to my music that loud... I mean, it's loud for me! but i have yet to turn the volume dial past midnight....

bi amping with the IT 85 is easy though, and if i found a used ST 85 (which is already matched to be used with the IT 85... i wouldn't need a crossover?), it could be a cheap <1K upgrade.

i could spend that much on cables!
128x128dennis_the_menace
drrdiamond
671 posts
 
The "power" of the amp has nothing to do with the gain.
For instance, ALL Krell amps have virtually the same gain, regardless of the power rating.

Richard
rockhead
83 posts
 
Thank you for the reply Marakanetz. Actually, I do not have a 20W amp. I was asking if low-output amps benefit from bi-amping more than high-powered amps. In other words, does something like a duplicate 20W SET amp improve sound moreso than a duplicate 500w class D amp? (ignoring preferences for tube/dig/ss)
Patrick
marakanetz's avatar
marakanetz
5,473 posts
 
Drrdiamond,
Is there Krell amp 20W/ch??...

In all logical sence in order 20W/ch to have the gain arround 30dB the input sencitivity must be 8 milivolts i.e. something between the phono and preamp. So theoretically in such amp you could plug in high-output cartridge directly. Or if you want the challenge please find two amps 500W/ch and 20W/ch with the same gain... I'm already intrigued...
marakanetz's avatar
marakanetz
5,473 posts
 
now to finalize...

It's all logically obvious that in active biamping we limit the "visible" freequency spectrum of each amplifier thus easing the task of amplification. It's beneficial for ALL amps in any combination BUT it also changes the speaker curve that might not be beneficial and needs to be checked and researched before the final setup.

There is no way in real life to connect passively 20W/ch amp with 500W/ch amp since YES, the output power does something to do with the amplifier's gain since it's a ratio between input voltage and output voltage.
drrdiamond
671 posts
 
I can't imagine wanting a Krell with only 20 watts per channel.
I think the gain of all Krell amps is 26 or 27db, regardless of size.

Richard
More to discover