Sibilance how do I get rid of it?


Hello
I am currently experincing a problem with sibilance in my system,I must admit I know that unless I set up a overly dampened ( lack of Hi's ) set up, I'm almost always going to have some degree of siblance,I listen to mass produced commercial cd's so I know that this is atleast 40% of my problem , and my listening room 26'x14'x8' is relatively live,,lanolium floors..no dampening,,etc,,
But somewhere in the back of my mind I hear "you need to do careful system matching,
My system consisits of:
Cal Aria MkIII CDP
Conrad Johnson Pv10a Pre
& Conrad Johnson PV 14L Pre
Llano A100 SS Amplifier
Dynaudio Contour 1.3 2 way's "GLORIOUS Midrange and Presence"
JPS Labs superconductor FX Ic's
Tara labs Time and Space with TFA Return speaker cables
Transparent Power Plus Power cord &
MIT run of the mil powercord on the Llano power amp
I have no power conditioning whatsoever except some hospital grade junction boxes in which I have the CDP & Pre's hooked up-AMp straight to the wall.
Now I have experimented with various IC's and speaker cable Discovery,Cardas,Transparent..etc
I don't want to address this problem thru cable choice
I have changed the tubes in the CDP as well as the PreAmps
the Jps labs provides me with the transparency speed and extended Hi frequencies,,and resolution, but with noticable
sibilance could it be the Ac line conditioning or lack of it that is introducing the stridency and graininess to the sound? if so where can I start?
What brand power cables offfer the best shielding or get's the GRUNGE out? I've heard good things about coincident
I knwo that I should ( and AM in the process of)addressing the room itself carpet is in order and some accoustic paneling to kill the early reflections,should I do this first? then get the ac conditioning? has anyone had any experience with Marigo Powercords, shuyanta, Coincident etc.
Please offer me your suggestions
braab8
AC line conditioning can go a long way toward allevieting sibilance issues in my experience. I use the Chang Lighspeed products, a 2500 for source components & a 9900 amp for (guess what) the amps. A 6400 ISO or a 9600 can do it all for you since you're not running large watts. Yes I also use upgrade AC cords & a dedicated AC line.
So if testing the system at midnight shows no reduction in sibilants from the daytime, then it is not the A/C power. Power conditioning would not be needed. From what is being said here.
I don't agree with the timeclock theory. Noisy power is due to many possible reasons, not necessarily load-related. The only way to determine if line conditioning will help is to try it, using *decent* equipment (not the lowest budget cheapest thing that you can find).
I have a pair of the Dynaudio 70's. I found using a pair of the Ah! LS Noise Killers on the speaker terminals really helped to smooth out the top end. They're only $50/pr. from Upscale Audio and they are easy to use. I don't know if this will help you but it might be a cheap fix.
I could be off base, but all the suggestions about electric quality, while good, won't help you with your problem. I think the sibilance is endemic to your source material. If you are listening to recently produced pop/rock material, then you will hear a good deal of sibilance. An unsophisticated/untrained vocalist singing into a condenser micropohone only an inch or two from his/her mouth (as is typical in an isolation booth) can produce tons of sibilance. Frequency keyed compression (de-essing) can lessen the problem, but compressing only a portion of the vocal range introduces its own set of problems and can sound somewhat unnatural. Additionally the current trend of applying massive amounts of compression to the final mix further accentuates sibilance. If the sibilance is embedded in your source music, then there's not much you can do about it. The above suggestions about room treatments, electricity and tubes can help with your system not adding siblilance to the music.