What tube amp mates well with Sonus Faber Amati's?

I have the same speakers, I have been shopping for amps as well. After speaking with several manufactures, this is what I learned:

Cary 805 - lovely sound and capable of playing decent volume, but won't do rock-n-roll. Sonus Faber has used 805 in many of their show demos, so they must like the 805 combination a lot. Bass will be soft, more than typical tube amps with push-pull design.

Jadis JA50 - the best sounding Jadis for the Amati according to the importer. Power corrupts, so the larger Jadis will not be as good as JA50 when you consider transparency and purity.

CAT JL2 - too new to know any history, but JL1 came highly recommended with Amati. Should be PP taken to the highest level.

I also know SF Power series, CJ, and ARC are all good with Amati with SF being the best among the three. SF has more drive capability and more neutral, lower distortion will also pay back on Amati.

I have heard the Amati's with Nagra VPA and PL-P preamp with Wadia 860 and Siltech cables. Highs and midrange were to die for but bass although quite deep was not very well controled. What about a pure class A amp like the Pass Aleph series or the older Classé DR-3? Closest to tubes but better bass control.

I would seriously consider the Wolcotts. The adjustable damping is a great advantage.

it is a pity that the amatis are not biampable. i have been through much grief recently trying to find power amps which can drive the amatis' woofers well. despite their fairly high sensitivity( 92 db ), the amatis do better with more power. i've heard the vtl 250s ....great midrange and detail but i was still not happy with the bass control. transistor power amps may have this advantage but i think that will come at the expense of the midrange/higher frequencies. i'm told that the new jadis defy 7 is a good match, i've yet to hear it.
i will keep you posted.

cheers,
anne

I must agree with Anne that these speakers will have better control with larger amps. I use Airtight ATM3 mono tube amps
which will drive the Sonus Fabers and control the bass. Other possibilities are ARC 200, VTL 250, VAC70/70, etc. I have listened to the Cary 805's with the same observation on lack of bass control. Siltech cables mentioned by Goldorak above are an excellent choice.