2nd amp or one bigger amp?


Hello to all,
I was a happy owner of a CJ MV-55 amp. I recenty purchased a pair of Martin Logan Sequel IIs from here (A-gon) and things were great. The combanation sounded very nice at lower volumes considering I lived in an apartment. I recently moved into a house and I can play much louder :) BUT the MV-55 does not have enough juice to do that at 45W/channel. Should I consider a second MV-55 for a monoblock operation or sell the MV-55 and get a Premier 11? I'm very tight on budget at this time and the 12s are way over my budget. any advise is greatly appreciated.

Thanks
Shahen
shahens
Sounds like you are hooked on tubes and I can understand why you would be. However, if you are not then you might want to consider one of Conrad Johnson's solid state amps like the MF2500 (used) or MF2250.

Or another option; I believe Martin Logans have the capability to run in a bi-amp fashion. If so you may want to purchase a CJ MF2250 ss amp and run it in combination with your MV55 tube amp. The MF2250 would handle the bass section and the MV55 would handle the mids and highs. A friend of mine runs this combo with a Premiere 11a / MF2250 into a pair of KEF's and it sounds great.

I am currently driving a pair of Thiel 3.6's with a CJ 16lsII tubed pre/ MF2500 ss amp. I am extremely pleased with the results.

Chuck
Keep in mind that if you biamp, you will have to match the impedance and output levels of the amps if they are of different types/models. In your instance with a tight budget, I would go for one larger amp. The 11 is a fair choice.
Timo is correct, that you will have to be sure the devices match, which is why I suggested the CJ combo. Call Knut at CJ if you are considering this route. He will be more than happy to answer your questions or make a suggestion.

Depending on the kind of music you listen too the 11(70wpc) may not provide the sound level you are looking for. You can buy a used MF2500 (250wpc) for about the same price or maybe even less than a used 11a and sound level will not be an issue.
I agree with Czbbcl above, first call Knut at CJ. He will walk you through all the scenarios. Also ask him what they have on their shelves in the form of reconditioned amps. One other option is the bi-amp route as mentioned. Pick up a used CJ Sonograph for the bass and leave the 55 for the midrange and up. I use a MV 60 and it has more power than the 50 and 55, but at times I wouldn't mind a little more headroom. A larger CJ amp is also a good route. Years ago I ran a pair of Bedini 25/25 with ML Sequels, so the the modern day option is the DNA route. This is a real option using a pair of DNA .5's.
Thank you all for your input and suggestions. my "budget" is between 900 and 1100 bucks. I figured either I spend 1100 on another MV-55 or sell mine for 1000, put another 800-900 and get the Premier 11. I'm definately sticking with a CJ product, that's for sure. the only concern that I have about the 11 is that it's based on a 6650 tubes and I like the sound of the EL43s, so I would have to hunt for a 11XS unit. I also read that the 11s don't have the same sweet mids as the MV-55... any thoughts?

Shahen