Ok folks before you read what I am about to post and think I have gone absolutely nuts, keep an open mind. Oh, and don't tell my wife as she will think I have lost my mind.
I finally placed my outboard crossover in a nice chassis. I was doing some research on how to best damp the box. We all know that the nicely damped CAST and Jupiter caps sound great and reduce noise greatly! Well I found several threads on folks using Reptisand ( reptile sand make of Quartz). Well, I decided to try it. I filled each crossover box with 30 pounds of Reptisand covering everything bottom to top. Be sure to only use the Reptisand brand made of Quartz as it has the best dialetric properties and the sand is so fine that it will not be abrasive to the components.
I did place the component board on a multilayer cork plateform making sure no park of the plateform touched the chassis on the sides. I did this as over time the board may want to sink down into the sand before hitting the bottom. However my crossover board is slotted and on small cork stilts so there is a 1 inch layer of sand between the most of the cork plateform and the crossover board.
Talk about reducing noise and music emerging from a dead quiet background! Any and all traces of glare, noise you thought you never had, is gone. More natural and organic sound. I am very please and this strange mod is a keeper.
Yes, it can be reversed by simply using a shop vac and removing the sand. But you won't do it. Ha!
Ok, I am a little nuts, but this was fun and I was very curious.
I finally placed my outboard crossover in a nice chassis. I was doing some research on how to best damp the box. We all know that the nicely damped CAST and Jupiter caps sound great and reduce noise greatly! Well I found several threads on folks using Reptisand ( reptile sand make of Quartz). Well, I decided to try it. I filled each crossover box with 30 pounds of Reptisand covering everything bottom to top. Be sure to only use the Reptisand brand made of Quartz as it has the best dialetric properties and the sand is so fine that it will not be abrasive to the components.
I did place the component board on a multilayer cork plateform making sure no park of the plateform touched the chassis on the sides. I did this as over time the board may want to sink down into the sand before hitting the bottom. However my crossover board is slotted and on small cork stilts so there is a 1 inch layer of sand between the most of the cork plateform and the crossover board.
Talk about reducing noise and music emerging from a dead quiet background! Any and all traces of glare, noise you thought you never had, is gone. More natural and organic sound. I am very please and this strange mod is a keeper.
Yes, it can be reversed by simply using a shop vac and removing the sand. But you won't do it. Ha!
Ok, I am a little nuts, but this was fun and I was very curious.