Can anyone tell me about the Proceed PAV good /bad

I'm not saying it isn't the preamp, it could be, but ground loops are tricky. For instance, I originally thought my preamp was the problem. I had a buzz coming through the speakers, when I unplugged the inputs to my amp, the buzz went away. I unplugged the inputs to the preamp one by one, the buzz stayed. So I thought it must be the preamp. I went to try to float the ground on the preamp, but noticed the buzz got louder when I unplugged the preamp. Strange. So then I thought maybe I needed Cardas Caps, I thought maybe the open RCA/XLR fittings on my preamp were picking up noise. Wrong, Cardas Caps did nothing. Then I unplugged my cable tv main line coming into the house, viola, buzz gone. So I bought a MIT Iso-LinQ to isolate the ground from my cable tv, it worked, no more buzz.

The bottom line is some equipment is more suspect to ground loop noise. There may be something wrong with the preamp, maybe it's just the system. I bought a brand new preamp direct from Cary about 12 years ago. It had a buzz. I sent it back, they could find nothing wrong and sent it back. The buzz was still there. I sent it back and again they told me there was nothing wrong. All I know was when I plugged my Aragon 24K in there was no noise, with the new Cary, there was. I figured out years later, that it was my system, not the Cary that had the problem. The Cary was just more sensitive to ground loop hums than the Aragon. When I had the same problem with an Audio Research preamp a couple years later, I realized that in my system, tubes were more prone to ground loop hums. With work, I could eliminate the hum, but for some reason they always picked up noise, more so than SS preamps. I don't know why.

I don't know if any of this helps, all I can say is try isolating the cable tv line and floating the grounds before you isolate and blame the preamp. It could be a ground loop hum.

Regards,
John

John, thanks for the info, I will try some of the things you suggested but I really want to get an AI preamp. I am trying to convince my sig. other that my current pre is no good with my system. hehe

In that case, then by all means, your current preamp IS broken. You have to get a new one.

John, thank you for the second opinion lol. by the way what would you recommend around 700-800 used. I have been considering an AI M3 but I don't need a phono stage but L1s are hard to find. I also was considering going back to conrad johnson something like a PV10AL, or maybe an AR LS2.

You may be best with the AI L1, it sounds like what you need and want. Have you tried placing a 'Want Ad' here at the 'Gon? I've found some very odd, rare pieces that way. You'd be surprised how many response you may get. Have you heard the AR? It's quite different from the conrad johnson. the cj tends to be warmer and smoother, while the AR is less tubey sounding, more dynamic. I owned a LS 2 many years ago, I enjoyed it, however, if you like the smoothness of the cj, you may not like the sparkle of the AR. If I were in your shoes, I'd go for the AI L1. Place a wanted ad today, see what's out there. Good luck and happy fishing.

Regards,
John